Search results

tight is fine

why what did tweeks do to it?? BMTR are ok the only place i would recommend is Northampton Motorsport

in my opinion noise = power, but thats just me!

you'll struggle to get ANY wheels in the correct offset that'll fit!

or get a mate to put a 10mm socket and rachet on from above and you undo them from below (use an extension with a wobbley end)

you can get one for a 182, there's a trophy with one fitted!!! lol

anyone get any pics of the pink cark "a bit" sideways (old hall and druids)

Pi, SPAX but get APEX

and then the crack you smoked the night before will wear off!

you cut the springs and i'll hunt you down, b**ch slap you and then call you a t**t sorry but you're asking for trouble!

never available, all talk no action from renault

my mate owns the place, pm for a price ;)

yep, all you got to do is take them out of the box (its a renault box too) and fit them, no effing about

and people say i'm just hear to sell sell sell!

172 and 182 has a rear torsion beam with rear springs and shocks, NOT a torsion bar

mintex extreme pads suck don't forget you need new rear wheel bearings also (and you have to swap abs rings over too)

T45 or 4130

thats a replica, unless the original ones were made from fibreglass! (look at the damage to the front end)

na they're not

not always, i was in a car when the rod bolt sheared at 8000rpm and smashed the piston to bits and put the rod through the block, the engine just stopped and smoke poured out everywhere (we were travelling at 120mph at the time) no noise as such

christ is he running some spacers or something!

has to be steel (T45 or 4130 would be good, if not CDS) i'll get you the details of the stuff we use

thats the old F7P/F7R engine

there's one under the bit bolted to the gearbox

our stealth is bloody quiet! (our others our loud agreed)

yeah they're a very well known and respected company, i've never dealt with their cams for the F4R, got any info on their cam specs?

LOL no worries steve ;)

^^there you go^^ standard 15inch wheels are definatley not 37!!! (you can fit upto an ET37 aftermarket wheel though)

well if they come as ET37 and you want them to be ET43 then thats 6mm you need taking off

Speak to Ali, he uses IF motorsport (i think) at Knockhill, there's loads of motorsport place up there! ours will cost you about 1hour to 1.5hrs labour to have fitted (if you're having a decat, if not its an hour job tops)