Search results for query: vibratechnics

Fk coilovers,spacers, vibratechnic mounts, power flex dogbone, solid top mounts, turinis, tune point, DS500's etc. Plus tyres only about 1k mikes old, new clutch in December, new headlamp washers in December and interior parts all in good shape including original steering wheel.

...constructed the mount (without the little square) leaves a couple of mm play around the bolt. This is (with the abuse of my Schrick cammed engine) not going to be stopped by a nut that's tightened to 44NM :down: Shame the people at Vibratechnics did not copy this construction from the oem mount

...on this on is 44NM (?) The OEM mount had a "square" hole where the engine-part of the mount would precisely slide/fit over.. The Vibratechnics has a round hole, with room for play : the bolt has movement in it even when tightened up. I can see metal shaving from the movement , not good...

...inlet and fuel rail guard Sprayshack painted engine cover New coolant bottle Scenic shifter with yanoo 3.0 Evol road dogbone mount Vibratechnics engine mount Fatty induction MarcR battery/induction cover Ktec super sport cat-back recessed exhaust Cambelt and dephaser fitted at Rentech in May...

...FSH - Belts done end 2014 by Specialist 55 Plate 75k Miles 11 Months MOT Suspension Spax RSX Fully Adjustable Dampening Coilovers Vibratechnics Solid Engine Mounts Evol Dogbone Mount PMS Solid Top Mounts and Strut Brace Whiteline Rear ARB with Upgraded Droplinks Powerflex Black Inner and...

...to be welded into the holes in the bulkhead to stop water getting in now all the heater box is removed. Looking into buying some Vibratechnics Engine and Gearbox mounts and some Powerflex Black Series bushes for the Twisted Dogbone too, ideal time to fit them while the engines being swapped...

...clutch plate SUSPENSION ST XTA coilovers Hardrace adjustable lower arms KW/Weitec rear ARB Superflex wishbone/engine/gearbox bushes Vibratechnics engine mount OMP upper + lower strut braces Carbon rear strut brace WHEELS BBS challenge R53 wheels 16x6.5J Yokohama AD08R 205/50/16 BRAKES...

...decat - Ktec Ultra non resonated centre section to go with the catback the car came with - Calipers painted orange - Fabia splitter - Vibratechnics upper engine mount I did buy some pro race 1.2 to go on but decided to go a different route Also decided to paint up the engine to tart the...

...decat - Ktec Ultra non resonated centre section to go with the catback the car came with - Calipers painted orange - Fabia splitter - Vibratechnics upper engine mount I did buy some pro race 1.2 to go on but decided to go a different route Also decided to paint up the engine to tart the...

Result! Will do! Thanks

Vibratechnics solid by the looks of it. Check under battery for the gearbox one. Love your engine bay

...15mm rear axle spacers Braided lines, castrol react fluid, brembo HC discs and EBC bluestuff pads Polybushed arb Polybushed dogbone Vibratechnics engine mounts Magnecore leads Custom induction with pipercross filter Aircon removed and cup setup fitted Full manifold back Ktec 2.5 inch...

Anyone any ideas ??? Sent from my iPhone using Tapatalk

...well over 5k in receipts. Cambelt and dephaser last changed 08/2016 KTEC Stealth Resonated system 182 Manifold Decat Link pipe Vibratechnics solid engine/gearbox and solid dogbone mount K&N 57i intake Sparco Rev fixed bucket seats Jon foz low mounts SPAX RSX front and rear full...

Cheers, Its done me well, Coming up for 5 years in my ownership as well this summer! Updated Spec, No doubt ill have forgotten a few things 365bhp/385ftlbs, Mapped by Ecotune RST Hybrid 630cc injectors Injen CAI 3" Decat Midbox Delete Lightweight SMF OZ Superleggera, 18x9 and 18x8 DIY Uprated...

is the bolt that connect the tripod to the batt mount still in one piece? mine started banging too turned out to be that bolt had been slitghly loose making the hole in the tripod oval and breaking the bolt. due to the Vibratechnics there was no sag on that side so very hard to diagnose....

...to a Quaife ATB: The car has 95000km's and the gearbox has to come of anyway so a new clutch kit, slave cylinder, crankgasket, vibratechnics gearbox support will be fitted for good measure. A few weeks ago my exhaust had cracked, so I started ordering replacement parts...an Akrapovic...

...-Ferodo DS2500 front brake pads and Brembo HC discs -New OE Brembo rear discs+bearings and OE ferodo pads + new OE e-brake cables -Vibratechnics Torque link (lower engine mount) + 2 new OE engine mounts on right side of the engine -refilled the AC -Stage 1 remap by BR-performance Belgium...

...Engine - Cat Cams 438 cams - TTV Lightened Flywheel - ARP Rod bolts - 'Fatty' induction kit - NGK Plugs - Forge Coolant Hoses - Vibratechnics Solid Engine Mounts - Powerflex Dogbone Mount - ELF 10w40 Fully Synthetic Oil Exhaust - Piper 2.25" exhaust with 3.5" Recessed Pipe - KTEC 200 Cell...

Was meant to be out last week in a friends car at Oulton but we got cancelled due to fog so next time I'm out will either be for a little blast at 3 sisters next week or I will wait till new year and book at Oulton Park again. Hopefully be doing a deal with a fellow member on here for some...

...Clio 172 cup, fancied getting into it, and purchased an 03 car on 109k for £1550. Spec: 2003 cup Piper cat back stainless exhaust Vibratechnics engine mounts this year. Evol race dogbone mount this year. Ramair filter this year. Track rod ends this year. Coilpack ,plugs,leads this year...

[emoji7] [emoji7]

That would look brilliant with one of the Marc R battery covers. The oil catch can would probably sit better on the battery cover as it can be bolted at the bottom too.

Forgot to add, #455 is now sporting a Vibratechnics engine mount too - here's how the engine bay currently stands:

They do look a work of art! I see you have them on yours :tongueout: are you able to compare them to then vibratechnic mounts, and could you fit them yourself or would you need a garage to fit them?

Cheers bud :grin: have a good one at Mallory :up: hopefully see you next year at either Snetterton or Cadwell :cool: Just ordered the pure motorsport rear toe/camber shims 0'20" to get the rear toe from toe-in to neutral http://www.pure-motorsport.co.uk/details.php?itemid=126&model=6 Also...

...& VBD x low seat frames. Large rear view mirror. Stub axles repainted. Rebuilt rear calipers PMS front solid top mounts & brace. Vibratechnics engine and gearbox mounts. Engine & box rebuilt 15k ago by DDC Renault specialists Doncaster. They had it as a track project and had it mapped...

Simple mate, just make sure you support the sump before removing the mount.

How is it to fit the new engine mounts? Looking st either the ktec race mounts or thr vibratechnic mounts

Gutted bud, been following this build for a while and amazed at the work put in! On a side note, id be interested in the vibratechnic engine mounts