Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Those two files would be fine as you are currently on 8100 software, as i said my 182 was on 8000 software and all went well. Good luck im sure you will be pleased with the results.
I have been running the revised maps for a month now and car definitely feels better, more responsive in all gears and a better idle, highly recommended. My original ECU software was ver 8000 so i used the 8100-7803.rst and the 8100-7a03 ron98 feb08.cal file. Oh and also i had some initial...
I bought one last week, the only mods on my car are an ITG panel filter and a sports cat (it is a FF 182). My original ecu software was ver 8000, i have updated it and the cal file to ver 8100 off the fastchip site. I must say i am very impressed with the results, i havn't had it on a rolling...
Received my RS tuner the otherday, after some help from Henk who was very helpful got it all up and running. Updated my software from version 8000 to the 8100 .rst file on the site and also the .cal file for the 8100 software. I have noticed quite a difference in performance, pulling much better...
Hi, i bought the ktech sports cat, can't say i noticed much in the way of power gain or difference in exhaust note, didn't come with lamda sensors, it is well made and iv had no problems, engine light comes on sometimes if you are at the lights for a while but soon goes out. My car is standard...
Hi thanks for your replys, iv looked at the rh engine mount and it appears to have moved, you can see circles where the washer positions used to be, im going to remove battery and have a look at rh engine mount, what sort of job is it to change these mounts also the gearbox dogbone mount. ta
Hi i have an 04 reg 182, recently there is a lot of vibration coming through the gear lever and clutch pedal when accelerating, the clutch pedal also seems to move slightly under acceleration, could this be a mounting problem, if so what should i be looking at? thanks
Thank you, plugs are bosch super 4 FR 78 X. Is it worth buying the hand held code reader from ktech (35 quid plus vat) would that show up lambda sensor fault?
Hi, was wondering if anyone has any ideas. I have an 04 reg 182, over the last few days i have noticed a lack in power and rough running (not smooth delivery of power) also smell from exhausts seems different, more burnt oil smell. The other thing thats happening is the emmision light (yellow...
Hi just to say it looks great. Screen looks a good fit once you have removed original head unit and hazard, demist door lock switches. Where have you resited these. thanks
hi mine is doing the same ie:stop and brake light come on together, fluid is ok and it has new pads. does yours go out when you lift the brake pedal up slightly?. i think its the brake switch setting.
Hi, can anyone please tell me whats involved in adjusting the brake indicator switch, the dash stop light and brake indicator keep coming on, pads fluid etc are fine, if when lights are on i lift the pedal slightly then they go out. thanks
Hi, i was going to ask the same question as you as my cat on my 182 cracked yesterday, wanted to get a sports cat, seem around the 300 mark, what sort of power gain is to expected, i still have the original renault system on it.
Wonder if anyone can help, the red stop light and the red brake warning light keep flashing on and off during driving sometimes staying on for up to a minute then going off. brake fluid level is fine and brakes feel fine, the esp light does not come on as i read it could be the brake pedal...
Hi, i was wondering if anyone had any ideas on the following problem. I have an 04 reg clio 182 with 41k on the clock, Over the last couple of weeks it has developed a problem, You can rev the engine freely at standstill and acceleration, the problem arises more on the motorway, if you are in...
as olly said check your video card is seated or any other cards for that matter, make sure your memory sims are seated correctly and that all the ribbon cables from the drives are fully seated, cant see you have damaged motherboard. When you say "moving cables" do you mean unplugging and sorting...
Hi, my 182 was sounding very rough on idle, rattling etc. Thought it was the aux belt pully tensioner but when i took it into renault it was the water pump, car has 36k on it. Had the aux belt done at the same time anyway.
many thanks for all your help on this and files that have been emailed to me, i will get a haynes manual to tell me how to remove most of the outside stuff ie. bumper etc.
Hi does anyone know of where i can get a manual or guide for the f4r engine, i wish to replace the aux belt etc myself. Done a fair bit of engine work on other cars so fancied doing it myself, but some guidance would be good. thanks