Search results

Hey guys, I need to replace my wishbone arms and I'm utterly stuck as to how you remove the front horizontal bolt!!! We have removed the rear(to your left as you look at it) vertical bolt and the balljoint at the front, but we are stuck on how the hell you remove the horizontal bolt at the...

It looks like someone before tried to take the tweeter grills out as there is a small crack in one and probably why the tweeters were removed?!? I want to take the top section of the dash off so i can secure and re-wire a new set of tweeters.

Hi Adam, The silver trim around the blower vents and trim along the glove box and either side of the steering column just pops out, just carefully prize it out with a trim-clip remover or flat headed screwdriver. as for the centre console, im still to figure that out, can't imagine its that...

I have no idea why i wrote mk4!!!!! I've searched mate, no luck with mk3 or mk4 lol

Hi everyone, Im going to replace the tweeters in the dash and was wondering if removing the dash will be the same as a mkII?? I've seen guides to do it on the mkII but not the mk4(2006-). Any help would be great Cheers Steve

Hey, I want to fit a short shifter kit to my car but can't find one to fit. Iv had one fitted to previous cars and love it. Anyone know where I can get one for my car or know a different model that will fit? I.e 1.2 kit etc. Cheers guys, steve

Good thinking, i'll have a look tomorrow. I noticed the bonnet release has it's own grommit and hole. Cheers mate

Thanks mate, but i've tried that. There is no way a 2 gauge wire is going through there. Had a look at drilling a new hole through the bulkhead, but wanted to know where other people had drilled a new hole before i go drilling holes everywhere

Hey guys! Right im fitting the new sound system over the next week. Speakers in front and rear, RCA cables remote cable and speakers wires fitted. Problem is the live wire for the amps!!!!!! i have a 06' clio 1.5dci and christ there is no room under that bonnet!!! Where have you guys...

Thought as much mate. To the dealer it is then. Car is looking great by the way! Im fitting my amp and sub tomorrow. How did you get on with feeding your live wire through firewall at the front of the car out of interest mate? Also was it easy enought to remove the front seats? (i.e...

Hey Mate, Where did you get the RS grills from mate?? Something iv wanted to do for a while now. Cheers, Steve

Agreed mate thats what im doing. Out of interest as your an audio man, i've noticed Rockford Fosgates 8" sub. How would this sound mate? Reason i like it is because i need the boot space, but want good sound aswell? Cheers

Just to update on this thread, yes an amp is being used. Not quite sure where your coming from when saying running them without a sub would be a waste of money. Amp'd quality components sound great, and after spending money on all of this im hardly going to install incorrectly!

drill a hole through the bulk somewhere, get a rubber washer and feed the wire that way.

Hey everyone, Need to replace the discs and pads on the front of the clio soon. Just wanting to know if there is anything i need to do it. i.e specific renault tool for the piston or removal of the brake setup? Worked on a few different manufacturers but this will be the first renault iv...

Cheers chris. Thats ok i dont mind doing that, but i thought better to ask first before i take the thing apart ;)

Hey Guys, i have a bulb blown on my Clio. Now usually this would be really easy to do but there is no room what so ever to get in the and replace it :mad: Im going to have to take the headlight unit out and replace it that way? Does anyone know the best way of doing this?? Would be...

I have an Alpine iDA X100 HU and Rockford Fosgate Power T152c Coaxial's in the rear and T152s Components for the front. This will sound great and produce real sound. Has anyone ever replace the tweeters in a MkIII?

13cm (5 1/4") in the door and a 1" tweeter in the dash mate. I will be replacing mine this week

ok mate i'll try just popping them out. Surely you don't have to take the dash out to replace them properly?

Hey everyone, Im replacing my front speakers this week on my Clio MkIII(latest shape) I was just wanting to know the best way to replace the tweeter in the dash? Would be good to get some info from someone who has done this. Cheers, Steve

Hey James, If it wasn't baked in a spray booth then i'd leave it for at least 4-5 days mate, the paint will be to soft. You can machine polish, after a few hours if baked but if not then leave it, you will burn through and be very annoyed

Iv got the tar remover, so i will remove it with that then clay. The overspray isnt to bad, so i think im gonna go for the megs mild overspray clay set for that. So megs clay sounds like a good bet then......that good as all my cleaning products are megs :)

Hey Rich, this car has never been polished or wax, its had one owner and yes they kept it clean but it wasnt waxed. It has overspray on the rear bumper and rear quarter, bits of road tar, and general grim build up on the car. I have seen the results of clay and it works well. Using a clay...

Hey everyone, I have recently bought myself a nice little Clio MkIII in Met. Black. I have always had very good bodywork cars. i.e i resprayed them lol Im up for trying out a good clay product on this car as im not going to do much bodywork to it or respray it as iv wanted a black car...

Cheers mate thats great, i'll order up some better bulbs now :cool:

lol it is, but its 10miles away at the old mans, and he's out and i forgot the key lol

Hey everyone, im going to upgrade my headlight bulbs soon. Can anyone tell me what type of bulbs i have? Clio Dynamique S MkIII (55plate) Cheers team steve

Hey team, has anyone got pics of a Clio MkIII lowered? Im interested in lowering mine at some point. Cheers, Steve

My mate is finding out about that this week, i done this on a car i worked on in the past but they were custom made. I will let you know the outcome cheers steve