Search results

You've ruined this. Was awesome when I owned it. AC even worked then :p

Stick with 25mm

Only had power and earth. So was either on or off

I did it using a mk3 megane rear wiper motor

What Clio?

So I eventually sold it :(, but it went to a good home. And in the spirit of budget build threads, I've replaced it with this Keep your eyes peeled for an update or two ;)

Sorry, I mean the input channels in the software, not the physical inputs. Input 1 (physical) is input 13 in the software from memory

If it can wait til Monday, I can tell you which wires you need to use ☺️

My TPS has 3 wires coming off it that connect to the existing loom. I just used a superseal connector so it can be plugged in or unplugged to remove from the car. OE air temp sensor works fine

A couple of things to consider How many things have you run off the 5v reference feed? Once you take the resistors into account, it can't always run everything. Are you checking the correct analog inputs. IIRC, input 1 is actually input 13 on the dash software. The first load of inputs are for...

VCDS boost readings are total, so its 33psi less 14.7 (atmos pressure)

You've had a busy couple of days reading through it 😂 Fingers crossed it doesn;t, but I'm sure it'll work itself out one way or another

I haven't actually made any decisions to get rid, but I'm about to lose my current storage for it, don't have time to build a garage at my place currently and have even less time for working on it or using it 🙈

I guess you missed most of the thread and the £20k plus of parts that are in it?

It most likely will, but you'll have to set up the sensors to work

Do the sensors have 5a to them with a pull up resistor? Are you using the dash 2 5a supply? And are you using it gir the fuel display too? Depending which resistors you've used, it can be too much for the supply voltage

I'd advertise that at £2500

You never know :sneaky:

Nah was all good. It was the vibrations through my leg that was the killer ? Worth it though, now looking for a sequential ?

After a passenger ride, I can confirm all of the above ☺️

I'll be there :D

I'm currently building a new loom. So go for it, it's all fresh in my head and I should have pictures ?

Yep, I have a data logger (gives you more channels) but it's in my garage unfitted yet

For speed - I have the original dash 2. Race technology sell a wheel speed sensor. I put it in the original ABS sensor hole on the passenger hub and ground all but two teeth off an and ring and welded up the gap between the two teeth. That way you have a dedicated speed sensor and I think it was...

Because everyone hates clios at some point

Whats a track day?

I did that, then changed it to a threaded sensor so it was neater. That's what I would do if it were me

Remove the map sensor plug. You'll need an air temp sensor though

I don't think my 140bhp diesel auto would be much fun on track ?

All the cool kids have Leons as a daily and clio track cars :ROFLMAO: