exhaust

Hi all looking to replace my exhaust system in next few months, looking for full system with a nice twin tail pipe, but nothing to loud but a good bhp increase? best opinions and options please? Regards Alex

Probably been asked before, I looked back a few pages but couldn't see anything. Went to change my rear exhaust hanger last night, doing it in my agarage with only caravan levellers to get it off the ground 6-8"! The 2 bolts at the back came loose Ok, the front one appears to have a nut on the...

After jacking the car up a few times fiddling with new alloys, I drove the car up and down the street, not even 1/4 mile. Wouldn't have even warmed up. When I got out of the car I could hear the exhaust blowing in center section. Got down to have a look and not only was it blowing by the cat...

Hi All, Quick question, replacing back box on my other halfs 206 at the weekend. What's the best stuff to use for sealing the joint? Sealant or Putty? Thanks

Hi all. Have a 182 with a miltek exhaust with a yozza decat pipe. For me it's too loud, what if any are my options to make things less boomy ? If I put a cat back in will it restrict power as you need every horse power in these. Personal experiences please. I have searched on hear and goggled...

Right chaps. So not long ago i installed 40mm lowering springs allround. Yesterday was the 1st change i got to test drive it, and everything seems ok, ride is nice and low & firm just how i want it for track days. Problem now is that the rear exhaust box sways to much, and even when still it...

My car currently has what I think a K-Tec cat back stealth exhaust on it. It has two silencers after the cat. To be honest I find the noise a bit loud and it drones whilst cruising along. I am thinking of refitting a standard type system on there simply because I use the car every day for a...

Hi all - new poster here that is off to look at a 172 tonight. Looking for something unmodified but understand that exhausts have long been changed on these cars due to the original design/rot. However, the one I'm viewing has an unusual twin backbox set up, looks nicely done with the rear...

Had a ktec system fitted a few months ago. At first, you couldn't see it hardly because the bumper is in the way but gradually the back box has dropped on the right hand side. Has a bracket come off or something? I've jacked it up and had a quick look but I'm hopeless with cars so not really...

I'm looking to buy a new backbox for my Ph1 172 - am I right in thinking that only the length for the centre section differs between models with or without a post-cat lambda sensor, and therefore the backboxes are identical between all Ph1 and Ph2 172s?

Ok all.. so have this tin can French thing with something resembling an exhaust from a Iveco truck. I believe its a yozza mid pipe with a milltek backbox. For me it's too loud. can I get a system is light well made not too loud that doesn't restrict power from the little engine??? I do like the...

Hi all i am new to the forum and this is my first post, I have just bought a 2005 182 cup FF and i am looking for a new exhaust and wasn't sure if anyone could advise me the best way to go (i know this question gets asked all the time but a lot of people want a quiet system not loud). I want an...

Bit of a stupid question. My centre exhaust hanger snapped and partially fell off. I want to replace it with a powerflex hanger. I have no idea what the old one looked like and there are loads on the power flex site. Can someone tell me which one I need. Thanks

I'm sure this has been asked before but I'm looking to convert the tailpipe on my 172 to a 182 twin pipe. Not looking for a full exhaust as I'm happy with my own mix&snatch custom but would really like to get some pipes to connect my current back box to the trim on my 182 bumper. Will upload...

Hey people, Can anyone tell me if this is the standard centre section please? im thinking of putting a standard back box on so wanted to know if it will be a straight swap, thanks

As per title my 182 came with a sportex exhaust which is a bit loud for my liking as I travel on the motorway everyday, can you buy a silencer or anything for after market exhausts or should I look at getting an oem one? Thanks

I need a new exhaust and instead of a standard one I would like a new one with a bit of a tone when I put my foot down but not a chavy one. Anyone tried this out? KTR Clio 2 Mild Steel Super Sports Stealth Exhaust System

Both on ebay, check descriptions. After £200 inc delivery for the exhaust. http://pages.ebay.com/link/?nav=item.view&alt=web&id=321683429259 £65 delivered for the wheel, boss and resistor. http://pages.ebay.com/link/?nav=item.view&alt=web&id=321683434284

my scorpion cat back is becoming tiresome noise wise, I have a centre box and a cat and single rear box. Any ideas where I can buy a aftermarket system but to original spec as I don't want the noise anymore. I've looked at various exhaust bungs to reduce noise but unsure how well they will work...

As in title, does anyone know the weight of the mild steel system?

I know it will fit on the 197 I'm just wondering if the carbon tailpipe trims fit the 197 diffuser properly ?

Hey peeps, My 182 custom exhaust blows at the join between the decat pipe and rear silencer as it doesn't seal properly. Can anyone recommend a custom exhaust specialist near south Suffolk/north Essex who could fabricate a new joint? Andy

Right im going to be on the look out for a yozza but I know people like to share there pics I am after a 172 yozza sport non recessed however 182 197 recessed I don't mind lets see what we have and yeah googles good but its nice to have a personal spin

Hi Guys, Looked at my exhaust last weekend and it's full of cracks, I'm thinking a contributing factor could be the powerflex mounts for the rear box. Would I be alright using ECP's own brand of exhaust mounts or do I need to pay extra and go for genuine? Thanks Simon

Hi all Does the clio cup 4-2-1 exhaust manifold fit the clio 172? Thanks

As the title says really! I want something kinda razpy but then not too loud cause ill be doing a few track days and dont wanna get turned down cause its too loud! The one i have on it atm is a stainless catback and its getting a bit annoying! any suggestions?

Does anyone have a guide or something to show what is involved with this? I've fitted a new exhaust but it's not fitting nicely around the olive joint from the cat back, it's almost as if the new exhaust dia olive joint is too big so it's not sealing properly. Can anyone explain what is...