10th Annual Surrey Rolling Road Day (Photos and Results)

[TimR26]

Today was the 10th Annual Cliosport Surrey Rolling Road Day, and the first at the new location in Farnborough.

Turnout was fantastic with 26 cars and here are the results in running order.....

I rounded most bhp figures down unless it was .8bhp or higher.

@Matt_90 - 106 GTI - 134bhp 117lbft

@Cripple - Mazda 3 MPS - 292bhp 310lbft

@Cub. - Supercharged Flamer - 228bhp 194lbft

@Toomer89 - Clio 182 - 186bhp 161lbft

Williamspaul on Clio197.net - Clio 225 - 244bhp 280lbft

@shaunoms - Monaco 172 - 175bhp 145lbft

@motman - Clio 1.6 - 111bhp 120lbft

Friend of shaunoms - RB 182 - 185bhp 155lbft

@MrBox - Ph2 172 - 180bhp 150lbft

@rob893 - 172 Cup - 177bhp 154lbft

@luigi33 - RS2'd Clio 172 - 189bhp 154lbft

@Pete. - Civic Type R - 202bhp 135lbft

Friend of rob893 - Audi A3 - 208bhp 215lbft

Friend of shaunoms - Megane R26 - 237bhp 257lbft

@Sir_Dave - M135i - 327bhp 335lbft

@jicholasnackson - M135i - 336bhp 345lbft

@Nick172Cup - Megane 225 - 235bhp 258lbft

@Jamie86 - Megane 175 - 176bhp 295lbft

horti on RSMegane.com - Megane 250 - 265bhp 167lbft

@Alistair14 - Artic Blue 182 - 176bhp 146lbft

Sorry didn't get your forum name - Megane 175 - 199bhp 330lbft

@Ceaglestone - Clio 182 - 176bhp 147lbft

@loggyboy - Clio 182 - 181bhp 155lbft

@green - ITB'd Ph1 - 200bhp 157lbft

@DrJekyll - Ph1 172 - 161bhp 134lbft

And last but not least (well in terms of torque 😂)

@JP83 - Clio DCi - 96bhp 162lbft

Thanks everyone that attended for making the day go so well, and nice to meet some new faces.

Please post up your graphs :smile:

 

[Cripple]

I know it's not a Clio, but had a good day. Thanks to the Clio boys and girls for being accommodating. The Mazda actually made 292bhp and 310lbft. Pretty happy with that, but not stopping there. Next up is a fuel pump upgrade which should see over 300bhp and 330lbft.

Shame the guy with the upgraded Megane was having issues. You should update us when you have found what the problem is. Boost leak?

Attached is my graph. Red lines are my run from last year before my remap.

 

[Pink-182]

Cheers for organising mate. Was a great crack

 

[TimR26]

I know it's not a Clio, but had a good day. Thanks to the Clio boys and girls for being accommodating. The Mazda actually made 292bhp and 310lbft. Pretty happy with that, but not stopping there. Next up is a fuel pump upgrade which should see over 300bhp and 330lbft.

Shame the guy with the upgraded Megane was having issues. You should update us when you have found what the problem is. Boost leak?

Attached is my graph. Red lines are my run from last year before my remap.

Edited with correct name and torque :smile:

How easy is it to get the power to where you are at the moment?

 

[Cripple]

Edited with correct name and torque :smile:

How easy is it to get the power to where you are at the moment?

At the moment it's basically intake, 2nd decat + remap. After that it's fuel pump, intercooler, down pipe. That would be good for 320bhp. After that it's meth or big turbo upgrade.

 

[TimR26]

At the moment it's basically intake, 2nd decat + remap. After that it's fuel pump, intercooler, down pipe. That would be good for 320bhp. After that it's meth or big turbo upgrade.

Much cheaper than it's been to get my R26 to 315bhp and 340lbft then!

 

[Matt_90]

Cheers for organising Tim, good to see people this morning.

 

[Toomer89]

Thanks for organising Tim, had a great morning and really impressed with the figures I got

 

[Tim.]

@Toomer89 - that's cracking figures mate, must go well! What engine mods have you done to achieve those?

 

[Toomer89]

Thanks mate. Yh was suprised myself, this is the second rs clio I've had and it did feel like a real strong engine, just got a Ktec induction kit and a rs tuner remap.

 

[TRH_Racing]

Thanks tim!
It was a good day .. im pretty happy with what i got tbh

 

[rob893]

Thanks for organising today Tim, was a good day.
Here is my graph. 172 Cup with a Ktec induction kit and cat back. Not bad for 117,000 miles!

 

[Jamie86]

Thanks for organising Tim!
Great to catch up with everyone again

 

[TRH_Racing]

i think i need to get one of these induction kits .. they're working wonders for these cars

worth getting one ?

 

[brisa4984]

nice meet! great turnout guys!!

 

[.Joe]

Twas a good day, sorry about the late turn up, was a last minute decision, i had the silver Meg 175 thats in need of a bigger intercooler :laughing:

 

[TRH_Racing]

I have a question .. i got two charts .. ones 176bhp and the other is 146 .. is that torque or wheel power? .. im confused, i got people telling me different when i think its torque ...

 

[Cub.]

Cheers Tim! Was a good day, great to see so many people out and a old selection of cars.

 

[TimR26]

I have a question .. i got two charts .. ones 176bhp and the other is 146 .. is that torque or wheel power? .. im confused, i got people telling me different when i think its torque ...

176bhp is at the flywheel figure, and 146 is at the wheels figure.

You should have three graphs showing flywheel bhp and afr (air fuel ratio), flywheel bhp and torque, and wheels bhp and torque.

 

[TimR26]

Twas a good day, sorry about the late turn up, was a last minute decision, i had the silver Meg 175 thats in need of a bigger intercooler :laughing:

That's fine mate, you where just in time to go with the other Meganes.

 

[Fletcher]

Good day :smile:

Shame my 172 wasn't ready for it.

 

[TimR26]

Good day :smile:

Shame my 172 wasn't ready for it.

It would have made good power judging my the other cars that ran today. I don't think I've ever seen so many good results before.

 

[JP83]

It must've been over-reading for mine to make as much as it did. [emoji23]

 

[Greeny.]

Surprisingly half decent results from most cars Looks like a fun day!

 

[Jekyll]

I'm 2 bhp lower than last year but not fussed, just need to drive it harder now!

 

[jicholasnackson]

Cheers for organizing a great day @TimR26
Looks so much better clean @Sir_Dave
Graph for a run in (15k) M135i, standard with M Performance exhaust.

 

[rs 1an]

you need a warp drive mark ​

 

[MarkCup]

Great turn out! First one I've missed I think since it started 10 years ago, I'll make the next for sure.

 

[Jamie86]

Twas a good day, sorry about the late turn up, was a last minute decision, i had the silver Meg 175 thats in need of a bigger intercooler :laughing:

What mods is yours running then? Didn't get the chance to chat

 

[loggyboy]

Very pleased with mine. Especially as my previous 182 only made 159 late last year.
Only mods are a cat back exhaust (powerflow I think) and a ram air filter. Not bad for 152k car. Thanks to @mark123 for selling me a 'good un'

 

[.Joe]

What mods is yours running then? Didn't get the chance to chat

It's running a piper cross panel filter, dpf delete and a straight pipe system, and a map at Rs tuning to suit, the map makes it pull so smoothly,
Is yours standard?

 

[Jamie86]

It's running a piper cross panel filter, dpf delete and a straight pipe system, and a map at Rs tuning to suit, the map makes it pull so smoothly,
Is yours standard?

Just an rs tuner map from henk, made the torque I expected but less bhp tbh

 

[.Joe]

Just an rs tuner map from henk, made the torque I expected but less bhp tbh

My maps limited on torque at the moment to save the clutch but looking to get that replace over the next year should see some more power out of it

 

[Lynchy1975]

I was hoping to get me B5 RS4 on as it's been a long time since I've had me car at Surrey rolling road ! Going next week thou once the Wagner intercoolers are fitted so should see more then before ?
Nice meeting you Tim and cheers for your advice on the R26

 

[Amos91]

What are the Surrey rollers known to output like?
Showing very strong figures for the 172s/182s

 

[loggyboy]

Id say they weren't far out. There was a mix of people expecting more and less. As I mentioned, I took my old 182 down to last meet towards end of last year and it only made 159 on same rollers. According to trustworthy concensus, the Graph pointed to a stunted inlet, and it did have a crappy unbranded, dirty, uncold fed cone filter. On that occasion cars were a showing mixed results. X

 

[Sir_Dave]

Cheers for organising Tim, had a great day!! Happy with the power, torque is just daft 😂

 

[Nick172Cup]

Shame the guy with the upgraded Megane was having issues. You should update us when you have found what the problem is. Boost leak?

Yeah it was a bit of a shame it didn't make the figures I'd hoped for, I'll be ordering a few parts in the week to hopefully rectify the issue and then get it rolling roaded again to see how it is!

 

[mark123]

Very pleased with mine. Especially as my previous 182 only made 159 late last year.
Only mods are a cat back exhaust (powerflow I think) and a ram air filter. Not bad for 152k car. Thanks to @mark123 for selling me a 'good un'

I was away otherwise would have come along. Good result

 

[Iain C]

Some decent figures there from the 1*2 cars.
Im amazed how much power thoes 135s have.