172 Air Filter - easy to change to ITG?

[Cabriochris]

I want to put a ITG filter in the standard enclosure which i imagine is very easy to do.

I take it you basically unscrew the half a dousen flower like screws and the ring holding it onto the engine and it just pops open so you can remove the old filter and stick in a new one. Is it as easy as that or is there more to it?
I fitted my gf's on her 1.2 and was easy but mine looks different as its a completely different fitment on the 2.0l.

 

[skindemon]

yup, that sounds about right to me - don't actually need to take the top half off, you can just get your hand in and pull the old one out and do the reverse with the ITG one.

I've got an ITG one in mine

 

[LegoHead]

It is easy, cant remember what to unscrew though, as I havent seen one for a while.

 

[Cabriochris]

Ok sounds easy enough, i will get one ordered then

 

[Neil G]

Very easy.....you don't even have to take the bolts fully out of the box....you can feel it when they are free from the bottom section of the box....al you do then is lift the top half off