182 Bumper on a 1.2 Dynamique

[SaMk2]

^ Thats what I want, although I read somewhere that "the 1.2 inner arch lining wont fit"

Can anyone give me any info on this? (Perhaps a way around it)



Thanks for your time.

 

[Nicky Thomas]

Yeah I was planning to put some on my 1.2

There is a away around it but it involves some spraying, filling and sanding to make it fit with the standard 1.2 wings

Or you could just buy the 182 wings.

 

[SaMk2]

Or you could just buy the 182 wings.

Do you know if any problems occur with the wings too or is it smooth sailing from there on?

 

[Beef-Mc]

You need new arch lines to go with the sport wings.

 

[SaMk2]

You need new arch lines to go with the sport wings.

Okay I think I'm out of my depth a little. I dont suppose you could elaborate?

Like TBH, I dont even know what arch lines are. I need educating

 

[JackJack]

Arch liners are plastic covers under the arch to stop all the crap going in everywhere. If you look in your arch you will see them.

 

[SaMk2]

Arch liners are plastic covers under the arch to stop all the crap going in everywhere. If you look in your arch you will see them.

Oh I see, thankyou, appreciate it.

 

[Coby.]

You will need -

RS Front Bumper
RS Front Wings
RS Sideskirts
RS Front Arch Liners

OR

RS Front Bumper with some reworking to line up with Non Sport wings

 

[SaMk2]

You will need -

RS Front Bumper
RS Front Wings
RS Sideskirts
RS Front Arch Liners

How much do you reckon that'll cost me if I ordered the parts from Renault?

 

[Coby.]

Um more than a RS Clio probably.

Breakers Yards or on here are your best bet and then get it all sprayed up to match if it isn't all in 676 which I presume is the paint code of your car

 

[Coby.]

If it was my car I'd just go with Colour Coding, RS Grill and if you really want a 172 rear Bumper.

Its what I've done to the Girlfriends Dynamique.... I'll get a picture.

 

[Coby.]

Not the best pics but all I have of it

Hope this helps.

 

[Knuckles]

Search for jungle jims guide, I'm gonna be getting one fitted as soon as one comes up cheap enough, I'm in no rush like I'm skint ATM lol. I reckon it'd cost around £85-£100 to get it sanded, filled, fitted and sprayed

 

[Coby.]

Search for jungle jims guide, I'm gonna be getting one fitted as soon as one comes up cheap enough, I'm in no rush like I'm skint ATM lol. I reckon it'd cost around £85-£100 to get it sanded, filled, fitted and sprayed

That seems quite a low figure unless you know someone in the trade.

I'd expect to pay a minimum of £100 just for the spraying without all the adjusting.

 

[Knuckles]

It seems I've found a very cheap place then

I don't know the guy personally, I was just recommended to him by a friend.

So far I've had

A nasty hole in a bumper filled and sprayed for £75

Side bump strips, bullets and spoiler sprayed for £50

A 182 rear bumper de-exhaust cutoutted and sprayed for £85.

The guys great, I would recommend him to anyone in the NE

 

[Nicky Thomas]

Not the best pics but all I have of it

Hope this helps.

Looks good mate, if my bumper was intact I think I would of done this.. But I need new front bumper and new wing