182 decat sounds

[liquid_force]

what would a 182 sound like with a standard zorst and get the cat taken of and the silencer so its just got the back bock left on it vids welcome

 

[Tom]

Sounds like a formula ford.

 

[liquid_force]

is that good or bad

 

[Tom]

Depends if you like it, ive done it and i think it sounds terrible.
But it cost £1.46 and its quicker.

 

[liquid_force]

1.46 what how

 

[Dave]

Yup its not a particularly pretty sounding car. But certainly opens up more.

 

[Dave]

1.46 what how

Tom being witty/dry/sarcastic.

 

[Dan Page]

thats what u got, standard exhaust with a yozzasport decat.
Sounds rough as f**k when its cold lol but once warmed dont sound much difference to standard, deffinately a bit beefier under load and sort of "tinny" in a funny way.

 

[Tom]

Actually im not being sarcastic.

£1.46 gets you a metre of mild steel 60mm pipe. which is what i used.

 

[John D]

Actually im not being sarcastic.

£1.46 gets you a metre of mild steel 60mm pipe. which is what i used.

LOL - Bargain

 

[Dubai182]

I bought a GDI one and it sounds the nuts.let me find the vid for you..

EDIT:here we go..not sure if its working though :S
http://www.zippyvideos.com/9970838034178566/mov00010/*dubai182

http://www.zippyvideos.com/5409176354178556/mov00009/*dubai182

 

[CHRIS172CUP]

TBR is the way forward

 

[Fred@BTM]

^if you are a pikey that can't weld

out of interest mr TBR how did you create the knuckle flange? (can i have a sticker)

 

[Tom]

Yes you can have a sticker.

The decat is based on the original cat. its very easy to do.

*Buy Pipe (60mm is best)
*Remove cat/center box.
*Cut the flange off the cat from the manifold end.
*Slot pipe into flange (may need to be grinded flush first)
*Tack weld pipe to flange
*Bend pipe slightly (i used heat and a bar)
*Weld flange properly
*Remove detachable bend section before back box
*Fit pipe to car (For the rear connection the pipe can have a slit cut in it for bracket use but i just welded it on)

Drive off.

Total cost
Pipe £1.46
Welding £depends
Skill £priceless

And all i have to do to refit the cat is reweld the flange back on.
Easy.