Adjustable Damp'ing, DIY?

[Rob]

So, I have a feeling my FK coilovers may be slightly uneven on the front with regards to the damping.

Is this something I can just change myself? I was thinking just wind them both to as soft as possible, then go say three full turns tighter on both, go out and test, then repeat?

Is there more to it than that or will I be alright?

 

[nick.]

I am not 100% sure but to me that would be the best and most logical way of doing it if you feel it is uneven damping.

Read

Go to the second page gives a couple of tips about how to set suspension up
Hope that helps

 

[Rob]

I'll give it a go then mate, cheers.

Hopefully it'll be 'reet.

 

[Rob]

Just a bump on this, wanted to see if anyone had done this themselves and had any advice.

 

[James.f]

Mine has always been diy, on my Spax adjustables they had something like 24clicks from soft to hard, so just adjusted the front say 15clicks on each side, easy never had a problem with them and always been spot on just then had to adjust the rears so they match the front,

 

[Rob]

Ah cool, don't even know if mine click. (I haven't even got the top cap so I'll have to improvise with a pair of grips or something)?