Would these fit into a Mk 2 Ph 2 Fog light hole?
http://www.halfords.com/webapp/wcs/...uctId_217984_langId_-1_categoryId_165688#dtab
http://www.halfords.com/webapp/wcs/...uctId_217984_langId_-1_categoryId_165688#dtab
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Angel Lights
- Thread starter Ed
- Start date
Description (revised) Seller assumes all responsibility for listing this item.
[FONT=Arial, Helvetica, sans-serif]Item Specifics - Car Parts & Accessories[/FONT]
[FONT=Arial, Helvetica, Sans-Serif]Type: [/FONT]Lights
[FONT=Arial, Helvetica, Sans-Serif]Intended Use: [/FONT]Modification/ Enhancement
[FONT=Arial, Helvetica, Sans-Serif]Subtype: [/FONT]Front Driving Lights
[FONT=Arial, Helvetica, Sans-Serif]Condition: [/FONT]New
[FONT=Arial, Helvetica, Sans-Serif]Manufacturer: [/FONT]--
[FONT=Arial, Helvetica, Sans-Serif]Model/ Series: [/FONT]--
vitamins&minerals-2u
Visit my eBay Shop:
vitamins&minerals-2u
Sign up for Shop newsletter
[FONT=Arial, Helvetica, Sans-Serif]Type: [/FONT]Lights
[FONT=Arial, Helvetica, Sans-Serif]Intended Use: [/FONT]Modification/ Enhancement
[FONT=Arial, Helvetica, Sans-Serif]Subtype: [/FONT]Front Driving Lights
[FONT=Arial, Helvetica, Sans-Serif]Condition: [/FONT]New
[FONT=Arial, Helvetica, Sans-Serif]Manufacturer: [/FONT]--
[FONT=Arial, Helvetica, Sans-Serif]Model/ Series: [/FONT]--
Sign up for Shop newsletter
[FONT=Arial, Helvetica, sans-serif]Ring Angel Eyes BRL0377[/FONT]
[FONT=Arial, Helvetica, sans-serif][/FONT]
- [FONT=Arial, Helvetica, sans-serif]
[*]E Marked - road legal
[*]Excellent Quality
[*]Prewired relay and terminals
[*]Fully fitting instructions
[*]Self adhesive dash mounted control switch
[*]Multfuntion - 4 Led halo or halo and driving lamps
[*]W102mm x H102mm x D72mm
[*]Everything you need for fast, easy installation[/FONT]
ive got a pair had them on my old clio! they fitted in jus had to make some better brackets for them
Oright good good, was it easy to wire up?
CLIO Iceberg 172
i had a set on my old metro, great lights for driving, but make sure you angle them right so you dont blind people,
also wireing it all up is a b**ch, you need to get a relay to link it all into, which dont come with the lighting kit, and also the leds are not as robust as you think, the vibration kills them, and if you dont weather proof the whole rig it rusts and stops working, i had to cut out a whole section of the loom due to it rubbing on the bumper and it chafing though the wire,
great lights when they work, just watch your placment and how you wire it all in.
also wireing it all up is a b**ch, you need to get a relay to link it all into, which dont come with the lighting kit, and also the leds are not as robust as you think, the vibration kills them, and if you dont weather proof the whole rig it rusts and stops working, i had to cut out a whole section of the loom due to it rubbing on the bumper and it chafing though the wire,
great lights when they work, just watch your placment and how you wire it all in.
I will make a guide and upload it onto here! Theres one left! i brought mine for £30 and £6.99 postage!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=320324646389&Category=28645
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=320324646389&Category=28645
i bought some lamps with 100mm lenses a little while ago and ended up taking them back as there was no way they could be made to fit without butchering the bumper.
the OE lamps are 90x100mm, as is the hole in the detachable lamp surround; the 100mm lens could have been made to fit this surround by cutting or reforming it with heat but the main problem was in that there was no room to mount the lamps in the bumper - the bracketry only really allows room for lamp bodies that aren't much bigger than the lens.
i did look at some angel eyes and suspect you'll find you have the same problem as the lamp body is likely to be too big to fit in the bumper.
i've been looking into this recently and think the most interesting option so far is these: http://www.s-v-c.co.uk/prod/90mm-headlights.html.
they're Hella 90mm headlamp units but they're expensive and they're still going to be a pig to fit - would have to fabricate frames that bolt up to the brackets on the back of the bumper.
would be v interested to hear how you get on with yours
the OE lamps are 90x100mm, as is the hole in the detachable lamp surround; the 100mm lens could have been made to fit this surround by cutting or reforming it with heat but the main problem was in that there was no room to mount the lamps in the bumper - the bracketry only really allows room for lamp bodies that aren't much bigger than the lens.
i did look at some angel eyes and suspect you'll find you have the same problem as the lamp body is likely to be too big to fit in the bumper.
i've been looking into this recently and think the most interesting option so far is these: http://www.s-v-c.co.uk/prod/90mm-headlights.html.
they're Hella 90mm headlamp units but they're expensive and they're still going to be a pig to fit - would have to fabricate frames that bolt up to the brackets on the back of the bumper.
would be v interested to hear how you get on with yours
i think the Ph2 lamp mounting is different
spotted your other thread about your taking the bumper off the other day - could you may be take some piccies of what you come up with? would be dead handy
may be wrong but didn't think angel eyes had internal beam adjustment (unlike the OE foggies), which i thought might be another headache
anyway, good luck with it
spotted your other thread about your taking the bumper off the other day - could you may be take some piccies of what you come up with? would be dead handy
may be wrong but didn't think angel eyes had internal beam adjustment (unlike the OE foggies), which i thought might be another headache
anyway, good luck with it
This is the bumper i got -> http://i9.ebayimg.com/06/m/000/9f/cf/715b_19.JPG
Ah i might need some help fitting them, help with all the wiring needed! How do i link them in with my headlights?
On my bumper i cant bolt it on to anything, will have to make a different mount for it!
It should look good when fitted!
Ah i might need some help fitting them, help with all the wiring needed! How do i link them in with my headlights?
On my bumper i cant bolt it on to anything, will have to make a different mount for it!
It should look good when fitted!
B
Brown.
angel fog lights look sweet......angel eye head lights on any thing other then a beemer look kak
not sure mate. it's a thinking cap job - you'd need to take a good look at what's behind the bumper. when i had a look, i thought it might be easiest to fabricate some sort of frame that uses the existing bracketry that's moulded into the bumper.
whatever you come up with needs to allow for adjustment of the lamps though (as you need to be able to aim the beams)
what did Robclio98 come up with?
whatever you come up with needs to allow for adjustment of the lamps though (as you need to be able to aim the beams)
what did Robclio98 come up with?
225 powered mk2
i just made up some quick small frames then bolted them onto the surrounds. bit different on the ph2 but should be able to be done.
Then for aiming them. they come on a metal bracket so i left that loose when i put them on... turned them on and adjusted them jobs a good un
Then for aiming them. they come on a metal bracket so i left that loose when i put them on... turned them on and adjusted them
jobs a good un 
Clio
well aslong as they fit into the hole, they should just be able to be srcewed into the top of bumper. well im fitting my rear 172 bumper, washing car, installing stereo, speakers and sub. will have a good look at fogs see if i can work out the best way to fix them. wiring on the other hand, i wont have a clue.
