ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Anything "wrong" with this harness?
- Thread starter JoeMarano
- Start date
bashracing
ClioSport Club Member
As above, buy the best you can afford, that looks dangerously cheap
As above, don't put yourself at risk with that cheap tat. Out of Fia date 3" 4/5 point with snap on fixings and quality buckle will be safe and more comfortable when pulled tight.
Bluebeard
ClioSport Moderator
Whichever has fuel
'eBay cage' are the ones that really grip my s**t.
Just bolted to the floor with two 10mm nuts.
f**king hell.
Jesus, Are people really that stupid that they would even consider using cheap harness'? Darwin award please.
If you really want to cheap out on something as important as a harness then at least look at something second hand from a reputable brand, Probably something out of date will be right up your street budget wise.
If you really want to cheap out on something as important as a harness then at least look at something second hand from a reputable brand, Probably something out of date will be right up your street budget wise.
Got a helmet for sale too if you want?
Not FIA approved but very cheap.
Not FIA approved but very cheap.
The ejection seat quick release ones we make at work i found was the best
http://m.ebay.co.uk/itm/Sparco-3-Po...-Seat-Harness-4608BV-/141551642469?nav=SEARCH
How about this? Sure I had the same in my saxo and I never died or got aids from it?
Im not racing the car just doing a trackday and need a harness just because...
How about this? Sure I had the same in my saxo and I never died or got aids from it?
Im not racing the car just doing a trackday and need a harness just because...
Also aren't all harnesses going to be bolt in? What would you clip a harness too??
Some of us don't know everything about harnesses bucket seats etc and are asking for help/advice.
While im on the topic what will I need to fit an omp subframe and corbeau clubsport seat to my clio?
Some of us don't know everything about harnesses bucket seats etc and are asking for help/advice.
While im on the topic what will I need to fit an omp subframe and corbeau clubsport seat to my clio?
JamesBryan
ClioSport Club Member
You can get clip on harnesses that attach to eyelet bolts that screw into the seatbelt holes.
You'll need high tensile bolts to attach the subframe to the car. Minimum of 8.0 tensile, but 10.9 or 12.9 if you can.
Jamie86
ClioSport Club Member
RS175,595,205gti,172
Where are you planning to connect the harness to and what seats do you have? Do you have a cage?
If no don't use a harness will cause more damage to you than a normal seatbelt if you have an accident.
Cub.
ClioSport Moderator
How many times did you crash your Saxo at 80mph?
Im too good to crash obviously lol
Yes I purchased an omp subframe and the seat already but im assuming it doesnt come with anything to fit it with?
What exactly and how many bolts and washers etc will I need.
Also reference the seatbelts how would I go about this as the seat belt "plug" is attached to the original seat?
Yes I purchased an omp subframe and the seat already but im assuming it doesnt come with anything to fit it with?
What exactly and how many bolts and washers etc will I need.
Also reference the seatbelts how would I go about this as the seat belt "plug" is attached to the original seat?
Clio RS 197
Outside seat belt mounts are M10, buy some M10 eyebolts and re-use the holes.
Inside, you will need to drill holes and mount the eyebolts from new. I used 7/16" UNF eyebolts with spreader plates underneath. Between the bolt and the car body i used split washers.
Behind, use the schroth guide to wrap your harness around the cross bars.
Most of the subframe bolts, seat side mounts, runners etc are all M8 bolts. Use the original bolts and nuts for mounting the subframe to the body. Count up what you need and get them ordered!!
Inside, you will need to drill holes and mount the eyebolts from new. I used 7/16" UNF eyebolts with spreader plates underneath. Between the bolt and the car body i used split washers.
Behind, use the schroth guide to wrap your harness around the cross bars.
Most of the subframe bolts, seat side mounts, runners etc are all M8 bolts. Use the original bolts and nuts for mounting the subframe to the body. Count up what you need and get them ordered!!
