Brake line flare tool (die and punch)

[Usr117063]

Im looking for something like this to do all sorts of din sizes if anyone has used one and can recommend?

Brake Pipe Flaring Tool Turret Kit 4.75mm 3/16 1/4 5/16 3/8 DIN SAE TBT0079 | eBay

Flaring tool suitable for brake pipes, hydraulic lines. Professional flaring tool suitable for making brake pipes, hydraulic lines etc. A Very high quality item, will produce OE factory finish DIN & SAE flares & made in England.

www.ebay.co.uk

Professional Brake Pipe Flaring Tool 4.75mm, 3/16", 1/4", 5/16" & 3/8" DIN SAE | eBay

Contains 4.75mm, 3/16", 1/4", 5/16" & 3/8" DIN SAE. This tool can be bench mounted in a vice or or with care and the correct support can be used in situ on the car its self.

www.ebay.co.uk

 

[R3k1355]

Are these the decent ones that don't make a total dogs dinner of things like the cheap ones always do?

If so I'm also after a good'un

 

[Usr117063]

lol yeah those type are useless. Ive been using a handheld one basically the same as I linked but just one size and its been great.

I think those types and the draper one are made the same bar the brand markings. I have a 8mm die already as I thought I could botch it in a vice but the lines as hard as nail and it failed.
Think ill get this one then get the dies I need, I done need loads of imperial sae sizes..

Brake Pipe Flaring Tool Turret Type 3/16" SAE 4.75MM DIN Professional | eBay

Professional Flaring Tool suitable for making brake pipes, hydraulic lines etc. Includes 3/16" and 4.75mm punch and die. The tool is also suitable for punches and dies 1/4, 5/16, 3/8 and 1/2". This tool can be mounted on a vice or with care can be supported in situ on the vehicle its self.

www.ebay.co.uk

 

[Usr117063]

This one gives you 3 dies for less

Professional Brake Pipe Flaring Tool 3/16" & 1/4" SAE & 4.75mm Din TBT0089 | eBay

Contains 4.75mm, 3/16", 1/4" DIN SAE. This tool can be bench mounted in a vice or or with care and the correct support can be used in situ on the car its self.

www.ebay.co.uk

 

[Mark.B]

I use one of these in my job, I've tried a few different ones over the years but these are by far the best. This is just the first one I found as an example but if you don't need all the tube sizes you can pick them up cheaper.

Or keep an eye out for a second hand one. They last forever if they're not abused, we've got one that must be 15 years old and still works like new.

https://www.ebay.co.uk/itm/Sykes-Pi...189027&hash=item23699309b5:g:HAUAAOSwXSJXPGgm

 

[loggyboy]

Worth checking out the handheld ones. Prices somewhere in the middle but i had an old gunson version off this type which worked well.

Draper BPF/HAND/SAE Expert 3/16'' SAE Hand-Held Brake Pipe Flaring Tool - Machine Mart - Machine Mart

www.machinemart.co.uk

 

[Usr117063]

Worth checking out the handheld ones. Prices somewhere in the middle but i had an old gunson version off this type which worked well.

Draper BPF/HAND/SAE Expert 3/16'' SAE Hand-Held Brake Pipe Flaring Tool - Machine Mart - Machine Mart

www.machinemart.co.uk

I have one of these types mate, thats what Ive been using. I need to do all sorts of sizes thats why Im after the type I linked.