Cub.
ClioSport Moderator
If you sell it I shall be displeased.
Really hope you fix it and keep it Mark.
My favourite car on CS by a stretch and after all your efforts, it would be good if you could enjoy it for a while.
Saying that, it would make a nice addition to my collection lol.
I have been in this position alot with mine (whilst its soooo far from working). The thing is i was never really sure what i would replace it with, sounds like you are a step further than i ever was, really would be a shame to see it go, but sometimes we do have to move on.... wish i never sold the valver for the 172 tbh
If you sell it I shall be displeased.
Gents it's massively pissed me off tbh and it's caused me more grief than I can be bothered with, so this is why it's now a consideration. It was built to do one thing - set a fast laptime at the ring. And it failed. Miserably because it shat itself.Whats this Witchcraft I'm hearing....
I'm not so sure this time mate.Next week it will all be fine and you'll be back in love with the stupid French box.
Gents it's massively pissed me off tbh and it's caused me more grief than I can be bothered with, so this is why it's now a consideration. It was built to do one thing - set a fast laptime at the ring. And it failed. Miserably because it shat itself.
There's only one other person who knows what the level of distress/anguish/upset it caused me and that's James (@BIGASH) because he was there living it with me that weekend.
These things are meant to be a fun hobby, and after that weekend it's become far from fun.
There will also be no more jc5's built by myself for the foreseeable future.
Life for me is changing, so maybe it's time to change my hobby as well. All still up in the air atm. Just need to have a good think.
Yeah I fully agree mate, mechanical failures do happen. What I can't get my head around and accept is this: why the f**k did it decide to pop the shaft out this time around? It's on stiffer suspension and I took the corner no differently to any other lap I've done. Just doesn't make sense to me.I do understand your grief mate but mechanical failures will happen. My RS4 engine s**t itself due to a core plug that came lose in the engine en-route to the ring, cost me £7k to buy a new engine, and thats not inc recovery (paid Lizard Logistics to collect that week due to a 2 week repatriation time limit). I just left my car at a Belgium VW dealership and cracked on with a hire car. I was totally f**ked off and felt like the world had ended. I still feel angry thinking about it now.
Suppose moral of the story is, these things do happen even to all makes of car.
However do understand your anger.
Yeah I agree mate, it would be a shame to get shut of it, but sometimes you've gotta move on. It's all up in the air though still atm mate - I've got decorating to sort before I even contemplate looking at the cup. And for the first time EVER, I'm actually enjoying doing it! Lol!It would be a shame I'd you sold it mate after all that hard work you've put in. But understandably it does take its toll. I wouldnt give up on your hobby though mate its what you enjoy.
If it goes mate, it'll be going in kit form as it's worth more in bits. As a guide though - I'd need to realise 10k from it to allow me to move on to pastures new.Totally understandable mate. Priorities change for us all in time. Be nice if you could get some pleasure out of it before it goes though.
Interested in what you think it is worth though, if you'd like to PM me?
How do you figure that mate?Store it...in six to 12 months time you'll e hapoy you did.
I'll have something else to tinker with though mate. It'll just have 2 wheels instead of 4...As an older young dad I found out that....time will fly and you'll appreciate time for yourself.....tinkering to clear the mind and such........being a dad can be very stressfull.
No they don't. It's the sudden stop that does that mate. LolThose things will kill ya!
I second this.As an older young dad I found out that....time will fly and you'll appreciate time for yourself.....tinkering to clear the mind and such........being a dad can be very stressfull.
I'd love to get a bike again, but that conversation (safety) happened when the second rugrat came along and well the bike was then consequently soldI'll have something else to tinker with though mate. It'll just have 2 wheels instead of 4...
Gents it's massively pissed me off tbh and it's caused me more grief than I can be bothered with, so this is why it's now a consideration. There's only one other person who knows what the level of distress/anguish/upset it caused me and that's James (@BIGASH) because he was there living it with me that weekend. These things are meant to be a fun hobby, and after that weekend it's become far from fun.
Hello mate. It's running a standard throttle body. It wasn't found to be a restriction, so there was no need for the ported item.Hi mate, did you use a stock 60mm TB on this or is it ported at all?
Had my new motor mapped now and found to be showing some vacuum so potentially looking at a restriction on the inlet, I'd be surprised if TB and I need to ascertain how the vacuum was measured etc - but as I know you're also making good power on a 197 inlet and TB thought I'd ask what you're running!
Cheers
What cams are you running then now mate?Ah ok, I'll def need to quiz them a bit more about how they measured this then before I chuck more bits at it.
Cheers
Well seeing as the maxi evo clios couldn't do better than 180lbft I'd definitely call your 195lbft into question. I wouldn't be surprised if the catcams aren't the cause of your problems tbh mate, as it wouldn't be the first time I've heard of them having incorrect timing marks and causing issues.Same 403's but it shares very little with the last engine really. They are just a stop cam gap before some big vvt delete cams and itb's, but just wondering if it could be why were seeing high egt's and again it's very knock sensitive with these mild cams and a high static cr. Hoping it potentially could ease a little both these issues, then it would just take the pressure off needing to buy the new cams asap tbh.
Sure made some numbers though penmouth: basically 224bhp and 195ftlb.
So you've got another forged engine then? Or are you running oem pistons? I know of Ray West. Met him at the Nurburgring one year when I was there as he was staying in the same hotel as me!Yeah I was surprised (and sceptical in equal measure), but it's a fully built motor from Ashford and the head was done by Ilmor, it's most certainly not some parts bin engine. My last engine on these cams made 215bhp and 182ftlb, but this is the difference between essentially a purpose built race motor (once the last 2 things are upgraded). The mapping was by Ray West too so not like it's the same place selling numbers to me.
I'd be confident it would knock out 190ftlb anywhere tbh. And the next set of upgrades I don't expect to improve the torque figure it'll just improve cylinder filling and VE higher up the rev range, so I would envisage say 240bhp/190-195ftlb. Time will tell and I will as usual be going back to SRR for independent validation in due course, and I'm not saying 240 is the likely next fig, I just know I want at least 230bhp and I'm guaranteed to eclipse that so winning what ever happens :smile:
So you've got another forged engine then? Or are you running oem pistons? I know of Ray West. Met him at the Nurburgring one year when I was there as he was staying in the same hotel as me!
Lol you'll need over 230hp to get the heavy 200 moving! Wasn't an issue in my lightweight cup.
200's need boost lol
Sent from my iPhone using Tapatalk
Lol! I take it you'll not be using this one for school run then????Oh yeah another forged motor mate indeed, it's an epic spec really which is just cams and itb's away from some serious grunt. The close box it has means it's already quick to be fair, does 135mph in 6th flat :smile:
If you want to ruin a 200 which is one of - if not the last decent N/A hatch made, then yes you could boost it :wink: Just not my thing though at all. Serious N/A junkie here I'm afraid.
Unfortunately mate, there sometimes comes a point in time when it becomes time to move on.Please tell me you aren't breaking this!
Just read through first few pages and the last few of its story at the ring.
I need to have a drive up and see it. You aren't far at all
Onwards and upwards though I suppose mate. It will also give me a potential opportunity to carry out something that's been a childhood dream of mine - to fly in a Spitfire.Gutted for you mate. 😧
Yeah it's a shame there aren't any 2 seater Hurricanes as that would be my first choice, or even a mosquito tbh!!I would absolutely love to go up in a Spit. Real dream of mine.
Big shame that this is going to be no more though. My favourite car on the forum by a long way. Would really love to buy it off you.