Bucket seat fitting list question

[parfitt172]

Hope someone can help

I Have got a pair of cobra Monaco bucket seats with a bottom mount setup, a pair of omp subframes and universal sliders.

Silly question really but can i get some confirmation on what else I need to get them fitted, will it be the following?

http://bit.ly/14kSU8M

And

http://bit.ly/19ymSya

Thanks

 

[JezzaMac]

Don't need either of them. Just bolts to bolt sliders to the seat and then seat with runners attached to the subframe then subframe onto the car!

 

[parfitt172]

That's what I thought but if you look at this pic the subframe and seat bolts just don't line up so I'm missing something somewhere...

 

[parfitt172]

Any other views on this? looking like the only way is to purchase side mount adapters and side mounts? silly seat

 

[JezzaMac]

What are the black things on the bottom of the runner in the second pic? The thing with all the teeth on the inside? Mine didn't have that.

If you take that off and then drill holes through the subframe where the holes on the bottom of the runners are then just a nut and bolt should do it.

 

[l33th3tr33]

What are the black things on the bottom of the runner in the second pic? The thing with all the teeth on the inside? Mine didn't have that.

If you take that off and then drill holes through the subframe where the holes on the bottom of the runners are then just a nut and bolt should do it.

That's part of the slider, each notch is an adjustment point for the slider. Just drill through the subframe and bolt it to the runners, Job done.