Bump strip removal

[Fagan]

Hi, currently removing my bump strips ready for colour coding.

However, on the side bump strips, I can get the front part out easily enough, but not the back. I read the guide and it states it should just slide forward, no tools needed. However mine do not seem to budge. There is slight play, but they still seem 'hooked on'. There isn't really anything to hold onto which makes life harder.

Any ideas?

Any help appreciated

 

[Fagan]

Bump, was hoping to get these off by tonight.

Cheers.

 

[Jungle_Jim]

i used the palms of my hands, push them into the car and forwards towards the door, if you do it hard enough they will come off

 

[Fagan]

Ok, just had another go using that technique jim, is there any area in particular where I should apply pressure?

I'm pushing hard, but these things aint shifting. It's hard to grip, keep sliding off.

Cheers

 

[christian rea]

look underthe bottom of them and theres a gap get va flat head screwdriver possilbly an electrical 1 but some masking tape round it and slide it up there that should release the pin

 

[Fagan]

look underthe bottom of them and theres a gap get va flat head screwdriver possilbly an electrical 1 but some masking tape round it and slide it up there that should release the pin

I'll have a go mate, cheers.

 

[Fagan]

Got them off using the small flathead mate, thanks alot!

 

[christian rea]

its cus im a pro

 

[adamlewis01]

its cus im a pro

lol:lolup:

 

[kic]

took my front bumper ones off tonight to put my colour coded ones one, i have no skin left on my fingers!!!!!