CDA-9853R - CD/MP3 and sub???

[clio_T5 TPR]

i just fitted a vibe space 12" sub last night but have the remote wire coming from the amp to the battery! but cause of this i have discovered that the sub gives out a 'popping' noise when the ignition is turned on, i have been told this in time will flatten my battery and also the 'popping' noise gets on my nerves!!! So does anybody have a clue where to wire the remote cable to the CDA-9853R - CD/MP3 head unit, please asap!!!!

 

[Griff]

Blue wire normally on the head unit.

 

[clio_T5 TPR]

i have the blue wire coming from my amp (remote) so where do i put it on the headunit???

 

[Dink]

blue with a white stripe

 

[clio_T5 TPR]

but where do i put the remote wire from the amp to the head unit (which hole)

 

[Griff]

hole?

There should be a blue wire coming from the headunit itself.

 

[muz]

the loom has a blue and white wire, you might need to snip it and connect suing a block connector or bullets then heatshrink.

you can then run the cable to the amp through the car. You don't need huge cable as it is only carrying a signal.

 

[clio_T5 TPR]

i take it i will have to cut this then wire the remote wire from the amp to this and everything should work??? as some guy was trying to charge me £35 to do this told him where to go, but im not very good with electronics!!!

 

[Dink]

how long is this wire from your amp:S

 

[James172Cup]

Its not rocket science son, there should be a blue wire with white stripes on it coming out the back of your head unit, get a length of wire, attach it to this blue wire and then run it to your amp, attach it to the 'remote' terminal on your amp, et voila, power.

 

[clio_T5 TPR]

all sorted now, no worry about a flat battery. cheers​