Chip

[tom-m]

At the mo i have a pretty much std valver engine wise. I got a full s/s magnex with de cat and air filter on there way very soon. I want to get a chip as well but i want one that will work with a williams engine as well as im goign to be looking into gettin a wiliams engine in the not so near future!

Any suggestions. What sort of gains will i be looking at with all this fitted??

 

[steve a]

Uni chip that way you can have it reprogramed once the willy lump is in there. Cost about 400-500. Or you could get a hillpower chip 150 fitted and 35 to have it reprogramed once you have the willy fitted. i guess teh uni chip will give more power and torque but its just down to what you can afford.

 

[Tom_16v]

Hill Power Chip

 

[tom-m]

The uni chip is a bit out of my price range. Thinkin the hill power one will be more up my street. So is it 185 for fitting it and programing it to the car. Prob best to get the exhaust / de cat and filter on first.

WHERE R THEY LOCATED?

 

[steve a]

150 fitted set up to current mods then 35 for a reprogram when you have a willy lump init. www.hillpower.co.uk

 

[tom-m]

Oh right thats wicked. So what does there chip do? Does it just increase the rev range? will i gain anymore bhp from that?

 

[Tom_16v]

Its £150 fitted for a member isnt is......will be a bit more unless you pay that fiver and become one

 

[tom-m]

Oh right cheers mate!

 

[Dave Hester]

Your chip is located underneath the jack inside the ecu, within a black plasitic box.

The chip will increase the rev limit up to about 7600-7800 rpm

You will gain roughly about 10bhp using a chip combined with a magnex , de-cat and performance air filter element in your standard box

Dont put an induction kit on your car you will only loose power

 

[Smokey]

Hill power ones are £125+ VAT for members or 150+ VAT to non members so get ya fiver out and join up!!