Clio 197 Rear Discs and Pads Change Questions

[RichB]

Looking to change a 197s rear discs and pads and there doesn't seem to be any specific info on this. Is it similar/the same as the 182 with a bearing and ABS ring attached to the disc and a 30mm hub nut to 175nm? Is there also a shim like on the 182 which needs replacing?

I've contacted G172 about souring the parts so hopefully get this done soon!

Cheers guys

 

[Typhoon]

I'm in the same boat and have had an awesome price from @G 172 !

The rear discs do have the bearing, yep.

 

[George@RTR_Parts]

Similar set up @RichB yes mate

The genuine Renault rear discs I supply come complete with bearings pressed in and ABS rings attached (magnetic not toothed though like on your 182)

No shim/spacer/washer and a slightly bigger rear hub nut (which I have in aswel)

 

[Phillip Beattie]

I changed mine recently and wrote up some instructions, hope they're helpful: https://fixitfriends.com/fixits/clio-197-or-200-change-or-upgrade-the-rear-discs
Phil

 

[197.]

You should also change both hub nuts as they aren't really supposed to be used more than once.

 

[Knuckles]

I changed mine recently and wrote up some instructions, hope they're helpful: https://fixitfriends.com/fixits/clio-197-or-200-change-or-upgrade-the-rear-discs
Phil

As if that's you!

I like your guides. You should definitely do some for here

 

[Knuckles]

You should also change both hub nuts as they aren't really supposed to be used more than once.

Do you mind elaborating as to why?

Are they nyloc jobbies?

 

[197.]

Do you mind elaborating as to why?

Are they nyloc jobbies?

Yes mate, they're nyloc type nuts. I bought a set for when my discs get changed.