Clio ECU’s (Please Help)

[Kasius]

Does anyone have any infomation (whatsoever) on ECUs on the this years 16v clios, im on about fitting a Fuel/Timing Controller, i have all the universal fitting instructions but just need to know that the cars ecu is geared up for it ?

 

[Captain Slarty]

well, its a RENIX (Renault / Siemens Nixdorf) Sirrius 32 or 34 unit.

what do you want to know ??. and what do you mean by a fuel / timer - have ya got forced induction ??

Joe.

 

[Kasius]

Im shortly going to be going down the NOS lane so as you can imagine want everything regulated and moniterd, do you think the ecu is kitted up for it ?

 

[Captain Slarty]

absolutely no probs..

just make sure you use a progressive controller for higher power - say 40 bhp and above.. use a boost ign r****d.. and only activate on WOT (Wide open throttle)

the ecu disable lama input at WOT.. all the fueling needs to done on the Nos / Fuel injectors or fogger.. put the fogger down stream of the throttle plate.

Hope that helps.. have fun

Joe..

 

[Kasius]

im going to be using the APEXi safc kit, ive been speaking to someone on anouther board and they seem to think it needs to be wired to a loom ? i think when i get it ill bring it down to you

 

[BUTRE]

Im concern about something has well.

Since I own a RT, changing my inj body for the laguna 1.8 SPI body, must I change the ECU for the 1.8 has well? does my own work with this?

Need to know what is needed before ordering the 1.8 inj body.

 

[BenR]

N02 ia a very simple affair, and so long as you set up your wet kit properly, then their is no need to monitor everything.....its not as dangerous as you think. I am running N02 on my 1982 carbed XR2, no electronic anything, and as you know, manufacturing tolerances were a lot worse back then...so you should be more than ok without all this electronic aids!