Correct OMP boss for 182 cup

[Brushwood69]

Hi, I ordered a 182 boss and it came and would not fit the car. I searched on here and found a reference to a tab being needed on some on not on others? Does anyone have a part number or can explain further?

Ta

BW69

 

[JB21]

I used this and fits fine to my cup...http://www.ybracing.com/omp-od1960r...lt-clio-182-and-cup-98-06-[od1960re114a].html

OD/1960RE114A

 

[Brushwood69]

Ta very much

 

[loggyboy]

The tabs are shown here they engage with the steering angle sensor.
The version for early 172s will still work, but you will get warning lights and errors on esp etc.

 

[Brushwood69]

@JB21 Did you have issues with steering angle sensor or was it a 172 cup?

 

[Matt555]

The OMP one I had which looks like the one JB21 has linked to above caused steering angle sensor errors in my 172 (non cup). I changed it for a momo one like the one shown by loggyboy above, you need the tabs on the side to turn the steering angle sensor with the wheel, and no problems

 

[Danith]

I used this and fits fine to my cup...http://www.ybracing.com/omp-od1960r...lt-clio-182-and-cup-98-06-[od1960re114a].html

OD/1960RE114A

I've just got this exact boss from YB today. Didn't see this thread before now!

Is this no good then? Do OMP not do one with the angle sensor (to turn off indicators?)?

 

[JB21]

I've just got this exact boss from YB today. Didn't see this thread before now!

Is this no good then? Do OMP not do one with the angle sensor (to turn off indicators?)?

Does it have tabs on it?

 

[Danith]

Doesn't look like it

 

[Danith]

 

[JB21]

It wont self cancel the indicators then mate. I just dealt with it, but I know there's no chance with you 🤣

 

[Danith]

Ha yep it'll do my tits in. But then if i have a mismatched omp wheel and boss it'll also annoy me. Living my best life.
So that's all it'll do is not cancel the indicators? No dash lights or owt? I've got the bag resistor

 

[JB21]

Ha yep it'll do my tits in. But then if i have a mismatched omp wheel and boss it'll also annoy me. Living my best life.
So that's all it'll do is not cancel the indicators? No dash lights or owt? I've got the bag resistor

Mine knocked the traction control and ASR off as well but I think that was down to the position of the steering angle squib. I left it as I turned TC off every time I got in the car anyway.

 

[JamesBryan]

It'll bring the esp light up too because the steering angle sensor won't be moving inline with the wheel.

 

[Danith]

SMASHING

 

[JamesBryan]

SMASHING

Get the MOMO one, there's no branding on them anyway so your OCD of them being the same will be ok 😂

Mine is MOMO boss with OMP wheel too.

 

[Danith]

Amazon sell em? After it for my trackday on Sunday.

 

[JamesBryan]

Amazon sell em? After it for my trackday on Sunday.

I'd imagine so. If not ring Demon and they'll next day one.

 

[Danith]

Will return this OMP one to YB racing.

Ordered the MOMO one from KAM Racing.

 

[Danith]

Momo turned up from KAM racing today. Nice one chumz.

You weren't wrong about the non branded! Didn't even come in a MOMO box or owt

 

[JamesBryan]

Momo turned up from KAM racing today. Nice one chumz.

You weren't wrong about the non branded! Didn't even come in a MOMO box or owt

You fitting it?

 

[Danith]

Yeah tomorrow will lash it all on. Hopefully get my cruise panel from Volantech but doubtful

 

[Danith]

@JamesBryan don't suppose you have any 3.3ohm resistors?

 

[JamesBryan]

@JamesBryan don't suppose you have any 3.3ohm resistors?

I don't mate.

You got a light on?

 

[Danith]

Yeah the one in the packet isn't the right ohm. Will have to go an electrical place tomorrow if you know any?

 

[JamesBryan]

Yeah the one in the packet isn't the right ohm. Will have to go an electrical place tomorrow if you know any?

Not that I know of since Maplin have gone 😏