Door bullet mod

[1985michael182]

Does anyone know who on here mods the door bullets where they sand away the 2.0 16v, carbon hydrodip them and then fit the decals?

 

[iimushroomzii]

@boomerbang2006

 

[Louis]

Campus ones are plain fyi

 

[Simon1975]

Got mine from Carbon Skins on Facebook

 

[1985michael182]

Got mine from Carbon Skins on Facebook

How much? Do they do the 2.0 16v?

 

[Simon1975]

How much? Do they do the 2.0 16v?

70 a pair I think. Not cheap but good quality

 

[loggyboy]

Used to be Sprayshack that did them, about £40 a set but not sure they are still doing them (or even in business)

 

[RustyMojo]

Quick question for you guys that have the carbon skin ones. Are they just standard bullets that have a layer of carbon fibre ‘skin’ I am tempted just to do it myself it should be simple and a hell of a Load cheaper than £70

 

[Simon1975]

Quick question for you guys that have the carbon skin ones. Are they just standard bullets that have a layer of carbon fibre ‘skin’ I am tempted just to do it myself it should be simple and a hell of a Load cheaper than £70

 

[Simon1975]

Close up pic. I'm not sure how he does them they fit spot on

 

[1985michael182]

Close up pic. I'm not sure how he does them they fit spot on

Surely they are hydro dipped?

 

[Krarl]

I have genuine carbon skinned ones on my megane, they're tiger sealed on because they're about £100 a pop if you can get your hands on some 😂

Excuse the water drips and marks, its no show car

 

[RustyMojo]

But are they just the standard bullets skinned in carbon?

 

[Krarl]

Yeah I'm sure they take a standard bullet, make a mould of sorts and then skin the carbon fibre into it

The lettering on these is way too "standard looking" to look as though they've laid carbon over an original, unless they're using very thin carbon on the face and then bulk the back out to reinforce it. No they're not dipped either, the back of them is raw carbon and resin like my washer blanks

 

[M.C..]

I have genuine carbon skinned ones on my megane, they're tiger sealed on because they're about £100 a pop if you can get your hands on some 😂

View attachment 1489302

Excuse the water drips and marks, its no show car

they look hydrodipped

 

[Krarl]

they look hydrodipped

Read my post above mate

I'm sure mega-carbon did them back in the day, whoever did them they're spot on

 

[Louis]

Definitely 3d printed

 

[Krarl]

Nah they're black and white, deffo papier mache!

 

[Daz...]

God knows who made mine, I got them off eBay probably 4 years ago for about £35.

 

[RustyMojo]

I thought as much, if they are the standard bullets skinned in carbon it should be a piece of piss to do at home with some peel ply and vacuum bags. I may buy a set of second hand bullets and give it a go

 

[Krarl]

If you can find someone breaking a clio campus locally get them as they're already plain black. Failing that just buy some 1.2 ones and sand them, people want far too much money for 2.0 16v ones

 

[RustyMojo]

Cheers I’ll look some up and then give it a bosh at some point. Balls to paying someone £70 for something as simple as that.

 

[1985michael182]

God knows who made mine, I got them off eBay probably 4 years ago for about £35.


View attachment 1489320

This is what I want but red lettering

 

[1985michael182]

If you can find someone breaking a clio campus locally get them as they're already plain black. Failing that just buy some 1.2 ones and sand them, people want far too much money for 2.0 16v ones

I may potentially just sand the lettering off mine and hydrodip them myself but I need the decals. Then i would lacquer over the lot

 

[M.C..]

I may potentially just sand the lettering off mine and hydrodip them myself but I need the decals. Then i would lacquer over the lot

best way to do it yourself I have done a couple of different designs.
Old ones

new ones

 

[Krarl]

Or be hard as f**k and use dCi 100 ones instead and trick retards into thinking its a diesel 😂

 

[1985michael182]

I somehow dont think I can get away with the DCI sleeper route

 

[gavinf91]

@boomerbang2006

lol

 

[1985michael182]

Right I have decided I am going to try hydrodipping them myself.

I need 2 x 2.0 16v decals in red.

Where from??

 

[1985michael182]

God knows who made mine, I got them off eBay probably 4 years ago for about £35.


View attachment 1489320

This is the goal but red decal

 

[M.C..]

Right I have decided I am going to try hydrodipping them myself.

I need 2 x 2.0 16v decals in red.

Where from??

Just send a message to somebody on ebay with a image of what you want, that's all I do if i want something I can not find

2 x RENAULT Sport clio cup megane Decal Stickers | eBay

RENAULT SPORT DECALS x2. Other Colours Available. Step 2 Turn the sticker over with the backing paper on the top. Slowly peel off the backing paper from the sticker. Ensure all parts of sticker are on the application tape.

www.ebay.co.uk

 

[1985michael182]

I'll have a go myself if it works well I'll see if anybody else would like some doing

 

[green]

Mine are from carbonskins. You can get proper full carbon ones. I went with some sort of plastic and paint that he already had and it was £60

 

[green]

Thought I should actually take some pictures with them on the car!

 

[1985michael182]

Mine are from carbonskins. You can get proper full carbon ones. I went with some sort of plastic and paint that he already had and it was £60

View attachment 1490625

Yea they're nice, but I want 2.0 16v like original ones

 

[green]

@1985michael182. He can do anything you want and almost any colour.

 

[MRBILLYUK]

Right I have decided I am going to try hydrodipping them myself.

I need 2 x 2.0 16v decals in red.

Where from??

There used be to a guy on here years ago that did lots of decals for renault sports. I can't remember his username but he sells on ebay under the name of n2grafix.
It might be worth messaging him. They were top quality and quite cheap.

Security measure

www.ebay.co.uk

 

[1985michael182]

Little update, N2Grafix still does the door bullet decals. Got 2 on their way.

 

[1985michael182]

Ok so...

I've had a go.

Started with the standard bullets

I removed the raised lettering with the DA sander starting with 80grit, 180, 240.
Quick scrub with a grey sctoch brite and cleaned them up.

Used adhesion promoter and then black primer. Wet and dry p800 with water to prep the surfaces so they are smooth and then coloured them up with satin black.

Cleaned a parts box out thoroughly and filled with clean water.
Ensuring theres no dust or bits floating on top of the water lay the film on the water shiney side down.
Leave for a minute to settle.
Spray the activator over the film and wait 30 seconds.
Dip your part slowly into the film at a 20°ish angle until fully submerged.
Shake the part to clear the rest of the film from the surface of the water.
Remove the part.

Next you need to wash the parts off with water, theres a slimy substance left on.
Once clean, dry them off.
At this stage I put my decals on.

Then I used our BMW clear to finish them off. Turned out nice.

Not 100% on the carbon colour being silvery but I think I might experiment with a few more including candy red carbon.

What do you guys think?

 

[RustyMojo]

I think they look really smart. When you going to start taking commissions 🤔