FASTCHIP-RSTUNER proudly presents :)

[Toxic#66]

So I did my RR run and to my disappointment top end power was nothing I expected.
After fitting the 182 mani the car pulled like bull from a start, I was hoping for a nice 19x figure after what RS Tuner showed me. In fact the car is much stronger till 5000rpms but top end power i not where it used to be

I hope there is still hope for me I'll be contacting Henk just after i get Innovate LC-1 hoked up with my RS Tuner

 

[franx]

the torque is pretty awesome, logically sacrificing top end

 

[franx]

218 NM of torque. When reading again i would almost say it is'nt possible. This RR has a good reputation ?

 

[Toxic#66]

the torque is pretty awesome, logically sacrificing top end

I know the car is fast But i still wanted a bit more as for BHP figure You think another OEM ECU custom calibration can help a bit ?

218 NM of torque. When reading again i would almost say it is'nt possible. This RR has a good reputation ?

Since I fitted the 182 mani and full 2,5"exhaust and made little adjustements to the inlet side the car became bloody fast. Seriuosly it pulls like bull from low down. That printout would explain it. I'm not w BHP who#@ but still I wanted a little more form it

 

[GodSpeed]

i thing i got a problem.

after mapping with the RS Tuner my engine feels more powerful and drive a lot better, the rev limit ist about 7500 i thing.

and then i do a PA....

i only have 114kw @6900rpm and 175 NM torque ???

drag was 29,96kw

i´m not really happy

That sounds about right!

I got these figures on my 182 (in RS tuner) 116kw @6300rpm and 188Nm@5400rpm (1200kg and drag 26kW)

Thats with the folowing mods:

No aqoustic valve + 2x 63mm piping to stock airbox + K&N planel filter
Miltek exhaust
Modified cat (full 2,5" all the way)
RS tuner generc map.

 

[matty172cup]

nice improvement there man

 

[GodSpeed]

nice improvement there man

Thanks!

Improvement over stock is huge. The inlet and cat mods actualy enlarged the intake-/exhaust-area by 60%. Should do quite alot for the flow.

http://rejsa.nu/forum/viewtopic.php?t=43793&postdays=0&postorder=asc&start=336

 

[stuart1989]

I would love it if understood rs tuners... is it the same as a ktec remap?

 

[Fastchip]

Basically it is a remap that you carry out yourself using a laptop.
But it is also a diagnostics tool.

 

[Da]

Excuse the dumb question, but how do you get these graphs from the RST? I've only ever had mine plugged in with the car ignition just on, not running.

:S

 

[en035]

Find the PA run window, type in the real weight of your car, put it in 3rd and pedal to the metal. You will see the results immediately.

 

[Sym0n]

Connect the RST and fire it up your car. Then click on the performance ANALyser tab. Enter the weight of your car and go find a long flat and straight road. Get in third gear at sub 2k revs and hit the start analyser button and then floor it through to the limiter. Viola a graph.

Be warned though the limiter in third will see you doing over a ton, so make sure the road you use is a private runway...

 

[Da]

Cool, thanks for that.

So, I need to take my laptop with me on the run?

 

[Sym0n]

Aye. Unless you have the premium RST.

 

[Da]

Thanks

 

[Nath02]

Aye. Unless you have the premium RST.

You will need a laptop even with a Premium RST.

 

[Sym0n]

You will need a laptop even with a Premium RST.

Thought that had data logging so that you didn't need to have the laptop in the car whilst out and about? Press a button on the dash to start the logging and press again to stop. :S

By the by anyway as so far I've only read of one person that's bought the premium version.

 

[Fastchip]

By the by anyway as so far I've only read of one person that's bought the premium version.

Maybe that is because they are just released.
The Standard & Pro are much longer available.

 

[Fastchip]

You will need a laptop even with a Premium RST.

Yes, you wil need a PC/laptop to configure the standalone functions of the Premium unit.
After that it can be used on its own for data logging. (up to 64 logs)

 

[Nath02]

Yes, you wil need a PC/laptop to configure the standalone functions of the Premium unit.
After that it can be used on its own for data logging. (up to 64 logs)

Including doing a PA run? I didn't think it could datalog PA's but could do other normal datalogging (I've asked this question before - I bought a Premium unit)? :S

 

[clio_manu]

If you put ITB's, can you use the RS Tuner?? or you have to go for other ECU?, cheers.

 

[en035]

Awesome AFR distribution through the rpm band

Thanks goes to Henk !!! Drive-ability is perfect and you feel the power at all rpm levels including lower band.