Fitting cup spolier.

[Fletcher]

How easy is this to do?

And can i use the OEM washer pipe from the standard 172 spolier?

Thanks in advance

 

[YorkshireDaz]

Did you manage to get one?

 

[Fletcher]

^^^^yes mate.

 

[Si]

can i have it?

 

[YorkshireDaz]

From the stealers?

 

[StevenMc29]

6 screws out
remove cable for brake light
remove hose for jet
remove standard spoiler

and then reversed for the new one

very very easy

not sure about the washer pipe but on my dynamique i just pulled it out a bit more and it worked fine

 

[Fletcher]

can i have it?

No :rasp:

From the stealers?

No mate, from ebay.

6 screws out
remove cable for brake light
remove hose for jet
remove standard spoiler

and then reversed for the new one

very very easy


not sure about the washer pipe but on my dynamique i just pulled it out a bit more and it worked fine

Thanks

 

[Fletcher]

I can't fit the brake connector to the new the cup spolier, it seems to big..

any ideas??

 

[Peperami]

YEEESSSSSSSS AT LAST!!!!

 

[Fletcher]

YEEESSSSSSSS AT LAST!!!!

Yes mate, if i can get it to fit :S

 

[AlexG]

i thought i remember reading on here that the connector for the brake light was different when changing from the standard 1*2 > cup spoiler?

 

[Fletcher]

i thought i remember reading on here that the connector for the brake light was different when changing from the standard 1*2 > cup spoiler?

that sounds about right mate, as i can't seem to get the 172's OEM one to fit.

 

[Peperami]

Guessing the wires/ power source will be the same, so can you not cut connector off and attatch old one, then cover it in oodles of duct tape.

 

[AlexG]

yeh. best thing to do would probally go to a scrappy and find one with a cup spoiler. cut the connector off and crimp it onto your car then you will be able to plug it straight in. the washer pipe should fit though as its just a rubber hose. Heres a pic of mine if its any help to you. i changed from the poverty spoiler to a dynamique one.

On the left is the washer jet hose and on the right is the connector for the brake light.

 

[Fletcher]

^^^^thanks.

 

[iimushroomzii]

Cant you just cut both connectors off and crimp it?

 

[Fletcher]

^^^yes i guess so.

 

[Ali]

I ghetto fitted mine with fishtank hose and a wire block! Worked fine.

 

[alex-avfc]

yeh. best thing to do would probally go to a scrappy and find one with a cup spoiler. cut the connector off and crimp it onto your car then you will be able to plug it straight in. the washer pipe should fit though as its just a rubber hose. Heres a pic of mine if its any help to you. i changed from the poverty spoiler to a dynamique one.

On the left is the washer jet hose and on the right is the connector for the brake light.

Alex G u have impressive skills for an 18 yr old m8

 

[AlexG]

Alex G u have impressive skills for an 18 yr old m8

Erm thanks... what impressed you?

 

[Beef-Mc]

Aye one has a round connecter and the other's square, just cut and rewire.