ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Fitting Rear Stub Axel Spacers



t90_lle

East of England
ClioSport Area Rep
Just going to fit my stub axels spacer and hoping people could just confirm as it’s been about 3 years since I last did this...
Undo 2x Caliper bolts an move out of way...
EA9F0F85-1C87-493F-9E48-717B9F65227A.jpeg

Undo hub nut nyloc and remove disc giving access to 4x t50 torx heads...
36E6A94B-EC82-468B-8A1F-420F2D156A37.jpeg

Finally undo the nuts whilst holding the t50s not the other way round...
3983849A-7D83-4C09-ABF4-D5548DCB5030.jpeg


I know the hub nut is 175nm can anyone please confirm the caliper and axel bolts torque please also?
Thanks
 

JamesBryan

ClioSport Club Member
  Titanium 182
The smaller M8 bolt is 29nm and the M10's are 57nm.

100nm for the big caliper to axle bolts.
 

JamesBryan

ClioSport Club Member
  Titanium 182
Brilliant and the above order is correct yeah?
isn’t there two washers/spacers behind the disc?

Yeah sounds about right.

Just one washer behind the disc, it has a concave side and a flat side.

Flat side faces the disc.
 

MLB

ClioSport Club Member
I believe they're T40, but yeah best to avoid undoing them from the front if you can..
20200326_123545.jpg

20200326_132727.jpg
 


Top