Fog lights install on pov clio.

[Cw Tuning.]

hi again
also got some fogs but i need to wire them in am i right in using a simple circuit? just earth them out in the chassis? then connect both positive wires into a switch then run the positive from the switch to an inline fuse and attach to th battery? cheers

 

[DanEdser]

sounds about right.

tell me how you get on so you can do mine

 

[DannyR]

Easy way would be to get the bit of loom as you will have a plug there ready to connect to and get a stalk from a model with fogs.

You don't need front fogs though in all honesty just look nicer in but not working.

 

[DanEdser]

Easy way would be to get the bit of loom as you will have a plug there ready to connect to and get a stalk from a model with fogs.

You don't need front fogs though in all honesty just look nicer in but not working.

with mine i have the bit of loom, but where does it plug to?

 

[DannyR]

The plug on the same bit as the horn loom under passenger headlight in wheels arch

 

[DanEdser]

The plug on the same bit as the horn loom under passenger headlight in wheels arch

on the phase 1?

 

[DannyR]

Yes

 

[Cw Tuning.]

i will have to have a look at that cheers dan

 

[DanEdser]

how did this go? i had a look and couldnt see anything below the light

 

[st3ve]

how did this go? i had a look and couldnt see anything below the light

You have to take the arch liner back iirc. It's situated just behind the bumper right at the bottom.

 

[DannyR]

It's about 6" of wire off the plug that goes to the horn.

 

[Cw Tuning.]

i havent actually had a look yet cars on gf's drive. ill get the arch off tomorow maybe and have a butchers as this seems safer then my mr bean wiring