ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
106 GTi
AG SRP and Meguiars NXT metal polish work great after other more abbrasive metal polishes to refine the finish.
I would get Autosol or Autoglym Metal Polish if you want larger quanties as it comes in 325ml bottles and use one of those first. You can them follow up with the Super Resin or Meguiars NXT metal polishes to refine the finish and increase the shine a touch. Working through the abrasive levels will finish the polished bits to a higher shine. A good friend of mine is a metal polisher and the same advice is what he gives to his customers.
When you have reached the levels of gloss you want , just use a plush cloth and some QD spray to wipe it over as regular maintenance when you don't need to polish.
I would get Autosol or Autoglym Metal Polish if you want larger quanties as it comes in 325ml bottles and use one of those first. You can them follow up with the Super Resin or Meguiars NXT metal polishes to refine the finish and increase the shine a touch. Working through the abrasive levels will finish the polished bits to a higher shine. A good friend of mine is a metal polisher and the same advice is what he gives to his customers.
When you have reached the levels of gloss you want , just use a plush cloth and some QD spray to wipe it over as regular maintenance when you don't need to polish.
Daniel
ClioSport Moderator
Whichever has fuel
Ok, cheers Rich.
Obviously the guy I bought the car off had it all polished but in his own words lost interest in it and i've not cleaned anything on it since I bought it so the engine is starting to look really shitty. Will the lack of effort have a lasting effect?? I really don't want to undo all his hard work...
Obviously the guy I bought the car off had it all polished but in his own words lost interest in it and i've not cleaned anything on it since I bought it so the engine is starting to look really shitty. Will the lack of effort have a lasting effect?? I really don't want to undo all his hard work...
106 GTi
You should be able to bring it back up, any pics of how it looks now?
Once something has been polished elbow grease will bring it back up, the only variable is how much effort it takes, Sometimes it is easier to get it re-licked over agin properly by machine. A lot of my mates work is re polishing previously polished bits. There is a lacquer now that can take to polished metal works if you want a shine that lasts without work, it does dull the finish slightly.
That said if you have access to a rotary or Porter cable and some 4 inch spot pads they can be used to save yourself so sore fingers.
Once something has been polished elbow grease will bring it back up, the only variable is how much effort it takes, Sometimes it is easier to get it re-licked over agin properly by machine. A lot of my mates work is re polishing previously polished bits. There is a lacquer now that can take to polished metal works if you want a shine that lasts without work, it does dull the finish slightly.
That said if you have access to a rotary or Porter cable and some 4 inch spot pads they can be used to save yourself so sore fingers.
PH2 172
I have this car...
And this week i'm going to clean it all up ready for the summer. What polish is best to use? I've briefly tried AG SRP but it did absolutely nothing.
Is there a specific product to use??
Moochas Grassy ass.
Is that a picture of your engine bay looks really nice who did all the chroming and how much did all that cost you cheers
VRS
the britemax metal polish and metal sealant are meant to be very good......
http://www.i4detailing.co.uk/acatalog/Metal_Polish_Sealant.html
http://www.i4detailing.co.uk/acatalog/Metal_Polish_Sealant.html
106 GTi
The Autosol will work lovely by machine. I use it on a light cut pad and then refine the finish with SRP on a polishing pad.
Similar threads
