Hoses for Brembo Conversion

[Oddesy]

Just sourcing all the parts for the Brembo conversion on my 172 Cup, looking at braided lines, I'm assuming I'll have to buy 197 hoses for the front, but will the rears from that kit fit my car or will I have to buy fronts for a 197 and rear for a 172/182?

Cheers!

 

[green]

I take it yours is a mk2 Clio? If so you will need lines making up. Mk2 end to 197 the other end on one line. Goodridge made my conversion lines. Only for front... rears is mk2 lines as there’s no need to change the rear caliper. Unless you really want 197 rear calipers...not sure if anyone makes a spacer for the rears?

 

[Crayola]

Here ?

 

[Oddesy]

Here ?

Literally just seen these on ebay! Thanks man

 

[Crayola]

Literally just seen these on ebay! Thanks man

No problem buddy, I had my eyes on some as I've got a set of brembos knocking about haha

 

[Oddesy]

No problem buddy, I had my eyes on some as I've got a set of brembos knocking about haha

Purchased and on their way!

 

[Crayola]

Purchased and on their way!

Did they ask for colour at the checkout?

 

[Oddesy]

I got a text after I'd ordered them asking what colour I wanted

 

[Racky]

Does anyone know what's the size for the Brembo caliper brake hose fitting ?

I am trying to make some custom Hel brake lines, but I don't know the fitting size for the brembo caliper ( from a Clio 197 / Megane 225 ).

Is it Banjo M8, M10 / 3/8" , M11 / 7/16" or M12 ?

I suppose the fitting angle is straight, right ?

 

[Usr117063]

Does anyone know what's the size for the Brembo caliper brake hose fitting ?

I am trying to make some custom Hel brake lines, but I don't know the fitting size for the brembo caliper ( from a Clio 197 / Megane 225 ).

Is it Banjo M8, M10 / 3/8" , M11 / 7/16" or M12 ?

I suppose the fitting angle is straight, right ?

M10 and a 15-30deg angle helps

 

[Usr117063]

 

[Racky]

Thank you very much !

For angle, the smallest are 20 and 45. Should I go for 20/ 45 or 20/45 side bend (banjo only) ?

M10 and a 15-30deg angle helps

 

[Usr117063]

@Racky I would go for 20 standard angle, on lock 45 kinda turns away too much

 

[Usr117063]

@Racky Or what I thought it did..
This is actually 30

 

[ripp]

Bump!
So I have a pair of 197 calipers and need the hoses to fit my 182. As far as I'm aware the braided kit for the 197 will fit? Something like the one kam sells here:

https://www.kamracing.co.uk/hel-performance-braided-brake-lines-renault-clio-mk3-rs-197-rs-200.html

Only the front hoses (REN-115-F)
I'm about to place an order and wanted to be sure thanks!

 

[Greg.w]

Bump!
So I have a pair of 197 calipers and need the hoses to fit my 182. As far as I'm aware the braided kit for the 197 will fit? Something like the one kam sells here:

https://www.kamracing.co.uk/hel-performance-braided-brake-lines-renault-clio-mk3-rs-197-rs-200.html

Only the front hoses (REN-115-F)
I'm about to place an order and wanted to be sure thanks!

Clio 172/182 Front AP/Brembo Brake Hose Kit

Clio 172 182 AP Brembo Brake Hose Kit , Clio Braided Brake Hose , Braided Brake Line

www.brtmotorsport.co.uk

 

[Advikaz]

Don't the like of PMS and KAM etc sell these off the shelf, so to speak - from memory.

 

[ripp]

Don't the like of PMS and KAM etc sell these off the shelf, so to speak - from memory.

hence I attached the link to kam's website above