How Can I Get Remove This ?

[MarcB]

Bumper is off and i was cleaning the small underseal spots from the Yozza with some steel wool and WD40and noticed some stains on the tail pipes from the polish car wash tossers spraying alloy wheel cleaner (Probably Acid) all over them

The steel wool and WD40 had no effect and i then tried some general Auto Glym car polish with no joy again.

Im guessing that Autosol Metal Polish is my next best bet but if that does not work whats my next move ?

 

[-Jamie-]

Britemax twins should clean that up with little effort

 

[benji93]

Use a metal polish with 000 grade steel wool

 

[Yellow Dave]

If a dedicated metal polish won't work, maybe a chemical cleaner. Something like werkstatt prime or similar

 

[Gus]

Like you said metal polish is what you need, cleans up exhausts really well.
I believe the yozza tips are the same diameter as miltek exhausts, what I use that works extremely well is this
brushhttp://www.amazon.co.uk/Silverline-250311-Wheel-Cleaning-Brush/dp/B001C7QZJ0/ref=sr_1_2?ie=UTF8&qid=1424771813&sr=8-2&keywords=wheel+brush
it fits inside the exhaust tip perfectly and I put a bit of metal polish on the bristles and give the exhaust a good tommy tank.

 

[Scrooge]

What Dave said. Also the swirls and small scratches on that now would wind me up a little bit, get a small polisher on it of sorts to bring it right back.

Also invest in Britemax metal twins like said above, using these regularly will mean not have to touch your exhaust again with wire wool

 

[MarcB]

Im not really that fussed regarding the small scratches and swirls but the chemical stains that been left on the tail pipes stand out a mile and really want them gone.

 

[davo172]

Autosol and wire wool should do it