how do i remove bullets and dimonds

[syko6288]

wondering if anyone can help me remove my bullets and dimonds front and rear as im wanting to cover them in 3m di noc carbon also dash strips steering wheel and gear knob insert

is it just a case of sticking something behind them and priseing them of carefuly trying not to break clips or is there an actual way of doing them


cheers daz

 

[fUbAr]

Steering insert - just pull hard.
Gear insert - just lever out.
Dash strips - open glove box and pull.
Diamonds - pull off.
bullets - screwdriver to lever off.

 

[Phil_tilt]

Fubar is the man in the know

 

[DEEMUS]

Fubar is the man in the know

+1

 

[ptfuzi]

pull off?? you don't have to remove the front bumper to remove the diamond?? there is not any bits on the diamonds??

 

[JoedotwasT5phy]

the bumper needs to come off for the front diamonds!

 

[Dave.]

i have some bullets alreay di-noc'd, id do you a swap for mine...

and check out my full interior set already di-noc'd in for sale section

 

[Dave.]

the bumper needs to come off for the front diamonds!

oh and this is wrong, it will pull straight off!

 

[fUbAr]

Seriously, everything just pulls off. The hardest one is the steering wheel insert, you will think it's about to snap but it won't. You might find it easier to pop one side of the airbag off from behind first.

Go carefully and you won't break anything.

 

[ptfuzi]

the bumper needs to come off for the front diamonds!

oh and this is wrong, it will pull straight off!

both front and back diamond??

hey you too please decide,lol,

i don't want to fu*k up anything!

i'll pull the front and back today night!
if something breaks it's your fault...:dapprove:

 

[Bubbles]

door badges can be pulled off too without screwdrivers - you can get a couple of fingers under the bottom corner and then pull it upwards - it seems like it is going to snap but it doesn't!

 

[AKFM1]

the rear diamond doesnt pull off!!

 

[ptfuzi]

the rear diamond doesnt pull off!!

but fubar said it will

 

[syko6288]

cheers for the help is it a case of pulling off for the rear bumper insert aswell or in there bits on the inside of the bumper i need to tackle ??

cheers

 

[Gaz_]

For bullets i'd rather remove the bump strip, only needs a hard shove towards the back of the car, much easier to remove the bullet then. If you try and lever it out still on the car, i'd put good money on you snapping the clips tbh!

 

[Dave.]

cheers for the help is it a case of pulling off for the rear bumper insert aswell or in there bits on the inside of the bumper i need to tackle ??

cheers

You need to be v careful when removing it mate, otherwise you will damage the retaining clips.