its ridiculous, i have removed the grey/yellow clip but the red/black 1 is impossible 2 do, any idea's??
thanks
Mike
thanks
Mike
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
How do you remove seat airbag clip?
- Thread starter Mike@MJCycles.com
- Start date
www.renparts.co.uk
its an easy one to break that one.you need to ease the red clip out. then iirc you pull the plug apart before its completely out.
ok, great!
anyone any pics?
anyone any pics?
ForceIndia
ClioSport Club Member
Gentlemans spec 200
I just clipped mine.
what does that mean my man?
Damn
Broke off the red tab, didnt manage to undo it and not the airbag/service light is on.
AAAAAAAAAHG
autoelectrics anyone?
Broke off the red tab, didnt manage to undo it and not the airbag/service light is on.
AAAAAAAAAHG
autoelectrics anyone?
Amen.
Josh the you mechanic said some people had called with a loud car, is it a clio though?
Josh the you mechanic said some people had called with a loud car, is it a clio though?
what car is it chicken pie?
ForceIndia
ClioSport Club Member
Gentlemans spec 200
I just cut through the wires, the clips an arse. Are you fitting buckets?
i have done it
i did damage it, the large red clip came off, the holder inside came off but i hope i have helped with the picture.
The first pic shows the inside if the clip, the bit you cant see.
I have highlighted the holder that the actual clip hooks onto. This did break because i didnt undo it correctly but if it was undone correctly, im sure it would of been ok.
the second pic shows the outside or the clip as it is normally. this is very important to get this bit right. i have highlighted the clip as a whole but used a red line to show where you DO NOT lift up. Where the red line is there is a gap that looks like you put a flat head screw driver in and push the clip Down, you do not! You put the flathead screw drive under both 'tongues' and lift up the lot. there isnt a lot of lift available and the hook your trying to lift up from the holder i talked about earlier is a substantial size. this means you dont quiet have enough lift of the tongue to bring the hook up and off the holder.
its difficult, and problems i will try to help.
i did damage it, the large red clip came off, the holder inside came off but i hope i have helped with the picture.
The first pic shows the inside if the clip, the bit you cant see.
I have highlighted the holder that the actual clip hooks onto. This did break because i didnt undo it correctly but if it was undone correctly, im sure it would of been ok.
the second pic shows the outside or the clip as it is normally. this is very important to get this bit right. i have highlighted the clip as a whole but used a red line to show where you DO NOT lift up. Where the red line is there is a gap that looks like you put a flat head screw driver in and push the clip Down, you do not! You put the flathead screw drive under both 'tongues' and lift up the lot. there isnt a lot of lift available and the hook your trying to lift up from the holder i talked about earlier is a substantial size. this means you dont quiet have enough lift of the tongue to bring the hook up and off the holder.
its difficult, and problems i will try to help.
