how on earth.............

[James.f]

do you fit a frikin Caf trumpet?

honest since saturday i just cant get it to stay in the fog light hole..

 

[ben_r1]

Whats a Caf trumpet lol?

 

[the_prophet]

cold air feed

where you trying to fit it?

 

[James.f]

trying to fit it in the Fog light hole,

 

[J03]

buy a smaller one

tiger seal?

 

[James.f]

smaller 1 will deffo not fit then, this is a 80mm, it sits just nicely in the hole, but it comes out..

Tiger seal ? to strong,

what have you lot used?

 

[the_prophet]

ive not done mine, yet, was just planning on securing it somehow, maybe use a bit of silicone sealant or something.

 

[ben_r1]

Think alot of ppl just cable tie it in place behind the fog light

 

[bomber]

i pop rivited mine in. ph1 or 2 front and what size CAF?

 

[J03]

Think alot of ppl just cable tie it in place behind the fog light

i did this with mine.. wrapped it around the trumpet and hose/feed then another tie wrapped it onto something...

 

[James.f]

Its a 1*2 bumper,

the Caf is 80mm, so i bought some 80mm hose, but it wont fit on the trumpet ffs,

Cable tie is a no no, as iv tried that & iv tried using a jubille clip which also failed, if they do a 90mm jubille then it would be handy, but halfords only went up to 80 ffs,

i just want it on now, as its been sprayed yellow

 

[Cup Cymru]

Try Screw Fix for jubilee clips

 

[joe81]

you can get 90mm clips, try a flexible sealant

 

[clio_luke]

i wedged mine in place then used a little bead of black silicone around where it joined the fog surround

 

[James.f]

Cheers il try the black silicone first, just hope it works

 

[Beef-Mc]

Last one I saw was cable tied into the lower grill, looked sheite!

 

[jamesp24]

I left a screw in from the foglight and then ziptie round the hose and screw holds it ok.

 

[James.f]

^ good idea, il give that a try tonight

 

[Riley!]

used a glue gun on mine

 

[Riley!]

anyone got a pic of a trumpet fitted in the fog hole. Thought it was just a case of feed to back of fog surround when using this method

 

[Greeny.]

Mine fits tightly into place with a good push and has been there for over a year, I have tied the hose into place behind as well.

 

[clio_rs]

is it not an mot failure if you only have the drivers foglight???

 

[st3ve]

IDK but what about the business about water getting in?

 

[aspire5600]

Quite a lot of cars still don't have front foglights so I guess perhaps not?

 

[swell]

how do you remover the fog light ?

 

[clio_rs]

yeah but an mot would fail if the car has them, and taking 1 out for a caf would mean only having 1 foglight?? that could be good for an mot if the car was built with them?