Through a recommendation from the owner of the previously detailed Focus RS - http://www.detailingworld.co.uk/forum/showthread.php?t=315120
I was contacted to detail a very nice Audi TT S-Line Cabriolet, in Ibis White.
The detail was again carried out in Bristol, with the customer living just a few miles away.
Onto the detail, a few before's of the car -
The roof was first on the list, brushed to remove cat hair and dust, followed by a wet vacuum to remove dirt.
The mould and tree sap that had built up was removed with AMDetails APC and a stiff brush.
Before
After
Looking a lot better!
Wheels cleaned with various brushes and AMDetails Wheels
The car was then soaked in AMDetails APC to loosen dirt and remove contaminants before hand washing.
AMDetails Bubbles and a CarPro Merino wash mitt used for the bodywork
Decon with IronX and Tardis as usual, followed by CarPro ultra fine clay.
3 hits on both the body and wheels removed most iron contamination and Tardis didn't have much of an effect, but removed all tar deposits before claying to avoid marring.
IronX crime scene!
The spoiler was raised to clean underneath
Before
After
Number Plates removed to clean underneath
Before
After
Light cleansing and enhancing Auto Finesse Rejuvenate was applied via DA
Roof sealed with 303 Aerospace sealant
Glass cleaned and protected with Gtechniq G1
Exhaust tips polished
Wiper blades wiped down with CarPro Eraser and plastics restored with Auto Finesse Revive
Wheels sealed with Gtechniq C1.5 and arches protected with 303 Aerospace
Paintwork finally sealed with 2 coats of Gtechniq C2v3!
And the finished photos
Thanks for looking if you have made it this far, comments always appreciated.
AndyI was contacted to detail a very nice Audi TT S-Line Cabriolet, in Ibis White.
The detail was again carried out in Bristol, with the customer living just a few miles away.
Onto the detail, a few before's of the car -
The roof was first on the list, brushed to remove cat hair and dust, followed by a wet vacuum to remove dirt.
The mould and tree sap that had built up was removed with AMDetails APC and a stiff brush.
Before
After
Looking a lot better!
Wheels cleaned with various brushes and AMDetails Wheels
The car was then soaked in AMDetails APC to loosen dirt and remove contaminants before hand washing.
AMDetails Bubbles and a CarPro Merino wash mitt used for the bodywork
Decon with IronX and Tardis as usual, followed by CarPro ultra fine clay.
3 hits on both the body and wheels removed most iron contamination and Tardis didn't have much of an effect, but removed all tar deposits before claying to avoid marring.
IronX crime scene!
The spoiler was raised to clean underneath
Before
After
Number Plates removed to clean underneath
Before
After
Light cleansing and enhancing Auto Finesse Rejuvenate was applied via DA
Roof sealed with 303 Aerospace sealant
Glass cleaned and protected with Gtechniq G1
Exhaust tips polished
Wiper blades wiped down with CarPro Eraser and plastics restored with Auto Finesse Revive
Wheels sealed with Gtechniq C1.5 and arches protected with 303 Aerospace
Paintwork finally sealed with 2 coats of Gtechniq C2v3!
And the finished photos
Thanks for looking if you have made it this far, comments always appreciated.