Induction kit?

[K4M_clio]

Hello helpful people (hopefully) I'm looking for an induction kit for my 2004 (54) Clio MK2 ph3, but struggling too find one that fits because of the rectangular fitment into the block as all I can find is round ones, help please

 

[K4M_clio]

?

 

[imprezaworks]

You got a pic

 

[K4M_clio]

I'll get one tomorrow, it's square into the block then its oval shaped into the airbox

 

[hipwell]

What engine is it?

Assuming you mean mk2 phase 2? Phase 3 didn't come out till 06 did it? The one with the wierd boot lid?

 

[K4M_clio]

1.6 16v , it's ph3 for sure

 

[K4M_clio]

What engine is it?

Assuming you mean mk2 phase 2? Phase 3 didn't come out till 06 did it? The one with the wierd boot lid?

That was phase 4, phase 3 was colour coded spolier, front bumper and new style alloys

 

[hipwell]

1.6 16v , it's ph3 for sure

Ah right. The one I'm thinking must be a phase 4 then in 06.

Get a pic of the throttle body up

 

[MonkeyKnifeFight]

I bought a K&N for my 1.6 16v it was a 53 plate but had the odd shaped inlet.

 

[K4M_clio]

Got some pics, am I looking for something that connects to the oval housing or the square

 

[K4M_clio]

Bit of an update/research, found an old thread on here via Google of the kit too buy for my model, just don't know what one too buy. Photos and a video of noise results although I won't be driving it how he does

Any info on product appreciated, cheers

 

[MonkeyKnifeFight]

Yea thats what i had.. what info you after

 

[K4M_clio]

Just what kit it is, a product code or a web link

 

[MonkeyKnifeFight]

The changes in Ph on the Mk2 where body and interior related. They won't have changed the induction setup on the k4m so you are looking for any setup that claims to fit a Mk2 1.6 16v

You could even just measure the oval and buy a section of silicone hose a couple of jubilee clips and a generic air filter.

 

[K4M_clio]

I looked into buying a bit of hose for the oval bit but it's 115mm so was quite expensive, see how cheap a kit I can get

 

[K4M_clio]

Going too bump an update, took some stuff apart today and as well as having the main air inlet which Is 85mm there is another small air intake which I'm guessing too cool the oil as there was residue around it, how do I get around this if I bought a silicone hose too go straight onto the block

 

[MonkeyKnifeFight]

I believe that pipe vents excess crank pressure. It's common to see oil here. You could fit an oil catch can or a simple breather like this one.

https://www.amazon.co.uk/dp/B00T2YDQV0/?tag=cliospnet01-21

You would need to measure the tube as that's just an example.

 

[K4M_clio]

Which did you go for, think it would look silly with a small cone filter and and surely a catch can would be ratlling around all the time which would be equally annoying

 

[K4M_clio]

Decided not too buy a kit and do it with silicone pipes now, and I can get a t piece too solve the other inlet issue . And I can do it all in blue piping which I would prefer

 

[K4M_clio]

Decided not too buy a kit and do it with silicone pipes now, and I can get a t piece too solve the other inlet issue . And I can do it all in blue piping which I would prefer

 

[K4M_clio]

Conkered this today

Stripped out factory airbox

Installed breather for crank pressure thanks to @MonkeyKnifeFight for this solution

Then put the jigsaw together

Happy with noise and look results, no noticeable power difference but this Is just a project too clean up the engine bay.


Comments welcome

 

[MonkeyKnifeFight]

Nailed it ?

 

[Adsy9]

How much did this end up costing?

 

[K4M_clio]

How much did this end up costing?

Around the £100 Mark give or take

 

[K4M_clio]

*little update*
After some advice given I fabricated a heat shield from some scrap metal for the induction kit, whilst I was at it I sprayed some other bits up and used some iron out too clean up underside of bonnet now looks like New, just want too spray battery casing yellow and I'm done

 

[K4M_clio]

*Another update*
Finally got around too spraying battery cage yellow.
Also wanted too go with 1*2 look for the induction kit as it was also getting a lot of heat soak. Super happy 😁