What voice coil config is the amp? AS this is needed in order to select an amp to run it to its potential.
Also what type of box is it going into?
Just going in a normal sub box like this:
http://cgi.ebay.co.uk/12-Inch-Sub-W...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
What voice coil config is the amp? AS this is needed in order to select an amp to run it to its potential.
Also what type of box is it going into?
^^^Good Question^^^
These subs are either;
dual 2ohm = Either, 1ohm or 4ohm overall
dual 4ohm = Either, 2ohm or 8ohm overall
dual 6ohm = Either, 3ohm or 12ohm overall
I would look for around 450w rms into your overall impedance.....
This is the spec of the sub,
Nominal Diameter: 12 inches (300 mm)
Continuous Power Handling: 300 Watts
Voice Coil: 2.25" diameter, 4-layer, Kapton former
Available Configurations: Dual 2 ohm, Dual 4 ohm or Dual 6 ohm
Xmax (one-way, linear): 0.46"-0.51" (11.7-13.0 mm) depending on specific model
Sealed Enclosure Range: 1.00-1.50 cu.ft. (28.3-42.0 liters)
Ported Enclosure Range: 2.00-3.00 cu.ft. (57.0-85.0 liters)
VRC™ Technology: YES
Elevated Frame Technology: YES
So to answer that can be set up in a few different ways.
What do you think will be best?