just fitted a oil temp and oil presure gauge

[mattypy282]

was just wondering what bar should the presure be around at tick over mines at 2bar and around 7bar at max load

 

[Fred@BTM]

from memory its something like £bar at 3Krpm, but don't quote me on that!

 

[T.Trophy]

Your right Fred it's

1 Bar at Idle
3 Bar at 3000rpm

According to the service manual anyway.

 

[mattypy282]

well mine was 1 bar on wen i got home so i presume this is when its warmed up then, was hight this morning when cold. i got the gauges to keep an eye on things just dont realy know what im looking for with the pressure

 

[Cro]

I've seen a few ask about fitting these before. You should stick up a guide how you did it.
Get pics up of what guages you went for

 

[mattypy282]

i got a sandwitch plate and both gauges realy easy to wire up. i have an alarm wich had a hole drilled in the bulk head for the wires so used that for the wirers. i also cheated on the ignition wire couldnt be arsed runing it to the headlight wires so conected it up to my remote wire on my head unit. just not sure if i got a small leak from the plate or not keeping an eye out