Locking wheel nut fail!

[clio_mad]

Pinched off another forum.

Cliffs: I broke the key in the lug... Than broke a tap in the key ( tap =titanium) ... used all drill bits, easy outs.. nada.. worked.. soooo

^ type of lug I had

It got really dark out...

Link

What a pleb!

 

[Poopensharten]

I dont see why the Wheel had to be cut off...

Surley an 'Easy-out' would have taken it out with slight intervention with a drill & cobalt drill bit

Jesus some people shouldnt be allowed near cars

 

[Rossy197]

LOL !

"Can't get the locking nut off so i've cut the wheel off"

 

[guysy]

Lol, Getting stuck in.

 

[rory182]

lol ever heard of a stud extractor?

I had to use a blow torch a chisel and a BFH on my Pug.

I think I'll get some decent locking nuts for the 172 actually as the oem ones are s**t, 182 one was much more substantial.

 

[Djw Dave]

I could have welded a bolt onto it and just took it off with a socket!

 

[Henry]

job done:S

 

[jamesybear]

obviously one gash b*****d with one ruined wheel now

 

[Bluebeard]

What a donkey.

 

[Sam]

LOL.. Epix fail.

Theyve also changed his user title on that forum to

WHEEL Slayer

 

[CountryBumpkin.]

What a donkey.

+1

 

[maynard]

plenty of ways this guy could have got it sorted without resorting to that. proper numpty.

 

[Davis]

what a penis! hasnt got the brains he was born with

 

[Gorms]

Them wheels are dead cheap bbs lm reps from ebay so no massive loss. Looks like he has replaced it with a gen item.

Paul

 

[Jungle_Jim]

could he not have welded a rod into the nut then just unscrew it lol

 

[Gaz.]

I could have welded a bolt onto it and just took it off with a socket!

could he not have welded a rod into the nut then just unscrew it lol

See above. Would have been a better idea.

 

[Poopensharten]

Them wheels are dead cheap bbs lm reps from ebay so no massive loss. Looks like he has replaced it with a gen item.

Paul

Aye but the effort required to cut off is a fate worse than death regardless of wheel cost

 

[dajones]

can we all go around and show him how to do it without cutting the wheel. then we can all laught at him

 

[Damo_Sport]

when this happened to my saxo vts.. i took it to a garage and they welded a pole to the nut and easy it was out!!

 

[Bloooor]

if worst comes to worst, can you not weld another nut onto it?

Edit. Damo

 

[Poopensharten]

Ah its a left hooker, any idea of what country this happened/

 

[Djw John]

I could have welded a bolt onto it and just took it off with a socket!

When you say tat you could've do you mean Kev could then we could refit the centre cap so we could hide the burn marks?!

 

[Djw Dave]

When you say tat you could've do you mean Kev could then we could refit the centre cap so we could hide the burn marks?!

Yeah, i thought i wrote "would". Was awesome funny!

 

[Henry]

Ah its a left hooker, any idea of what country this happened/

Romania? somewhere with lots of gypsies, anyway

thing is, he's obviously put those photos together for use on a forum, where he could presumably just have asked for suggestions. live&learn, i guess

 

[Gary-Lew]

What a TURD

 

[Poopensharten]

Plenty of fail there right enough.

About a 9.5 of failure

 

[pritchard182]

what a dick i took 4 out of my first saxo by driling and re taping then took another 4 out of my second saxo with a hamer and a impact screwdriver. cheap saxos

 

[DannoTheGreat]

what a tool

 

[Christopher]

PMSL!!

 

[S23]

Oh my lord! What a complete idiot! Why in the hell would cutting up your alloy ever be a good idea? Jebend.

 

[Marky_]

That is impressively stupid!

 

[Ali]

HAHA! Fake wheels too!

 

[Jon.L]

WOW !

 

[Addz]

genious!

 

[Mike_182]

Peugeot dealers have to do this on a fairly regular basis as their keys are s**t and the locking nuts are 'snap-off' type, so you can't actually get an extractor on them...