LOWERED PICS OF 16VALVES

[Mikey16vClio]

Please post hear with the front & rear lowering measurments. Ive checked the gallery BTW but not much detail on how low they have gone at front & rear. Clio Mk1 1.8 16vs thanx.

MUCH APPRECIATED

 

[BenR]

lol, do you actually do anything yourself!???

 

[Mikey16vClio]

True.

 

[Ben H]

Mine is just lowered about -40mm at the front on springs and about -20mm at the rear with the adjustment of the torsion bar. The ground in this picture is on a bit of an angle, so the front is actually a bit lower on the left hand side.

http://images.cardomain.com/member_img_b/286000-286999/286766_15_full.jpg

 

[Mikey16vClio]

Thats GOT to be the wrong way round hasnt it? 40mil at the rear it looks like from hear. That rhimes

 

[Ben H]

Like I said, theres a slope.

 

[aaronc]

Mines 1 notch at the back around 40mil. and around 35/40mil at the front

 

[damianshaker]

about 40mm at the back and 35mm springs at the front. Sits nice on the ground and doesnt scrape at all at the back. Never have any passengers in the back though so not too sure when fully loaded.

 

[wongy008]

mine is 25 mm up front and i nothc on rear

http://www.cliosport.net/gallery/clio16v/s-1008-1.jpghttp://www.cliosport.net/gallery/clio16v/s-1008-1.jpg



cant get 5 in car easily

wongy

 

[Matbrown]

http://www.daz-uk.com/cliosport/meets/midlands-150203/DCP_2081.htmlhttp://www.daz-uk.com/cliosport/meets/midlands-150203/DCP_2081.html

About 60mm front and back!



Mat.

 

[Mikey16vClio]

Any 1 with 30 or 35mil front & rear?

 

[Rajk]

Iv got 35 at the front and 30 at the rear cant host pics!

 

[Mikey16vClio]

Well does it look good on 15s? Nicely low, would u have it any lower, etc? Cheers.

 

[Mikey16vClio]

DOES ANY1 HAVE THIER VALVER LOWERED BY 35MM SO I CAN HAVE A BUTCHERS PLEASE?

Help me out so i know how low to go! Thanx.

I like urs Ben H, looks smart & tidy, just the right height IMO, but it really doesnt look like its just 20mm lower at the back. Any pics from other angles? Cheers.

 

[Fatherted]

many many moons ago........i used to have a black 1.4rt which was lowered 1 notch at the back & lowered 35mm at the frount........ill be honest....the frount was perfect.....did not affect steering etc....the back was too low .......it looked as if i had a large bag of sand in the boot !!!

 

[Mikey16vClio]

Humm. Hows about your 16v?

There is a LOT more space between wheel and arch at the rear though, so would have thought the front would look comparitvly too low if each end is lowered by the same amount.

 

[Mikey16vClio]

Hows about some more pics if we have any? Thanx for the posts so far.

 

[Scott Wood]

My Valver is on 17" and lowered 60mm im gonna take some piccies on monday, so ill post em up then.