Mounts

[tom172cup]

Has anyone used the complete engine gearbox mount kit from Ktec. if so how good is it my engine moves around a lot now. http://www.k-tecracing.com/show_product.asp?id=3734&appid=2
also is this a drive way job or off to the garage
Thanking you

 

[mike1pow]

I will be having the mounts done witht he RS2 Mani, supposed o give a slight increase in car vibration but will stiffen things up a bit.

I have the Powerflex dogbone mount on now and its tidied up the change alot. this can be done on the drive if you have the right tools. i used a bearing press in work to pop the old bushes out but it can be done with a vice nad hammer.

think the Engine mounts are best to be done by a garage, can be done on driveway but requires jacking engine up tol swap them.

 

[CraigIrl]

I'm using these at the minute. A bit hard when first fitted but after a week or so they soften down a bit. It's amazing how tight the car feels. The Vibratechnics stuff is a great piece of kit. Would recommend it to anyone.

 

[tom172cup]

got them ordered now so i will find out soon enough what about the twisted something or other mount worth doin that at the same time

 

[mike1pow]

fitted the twisted dogbone mount the other day

Sorted out the sloppy gearstick quite a bit

 

[tom172cup]

fitted the twisted dogbone mount the other day

Sorted out the sloppy gearstick quite a bit

how easy to do is it then mike

 

[hipwell]

dogbone mount is easy. Took me about 20 mins in total and thats including wacking out and blowtorching the old bushes.

 

[tom172cup]

Ok cool shall get on with it then

 

[mike1pow]

Hardest part is removing the old bushes! easily done with the right tools

 

[tom172cup]

i have got some burning gear lol

 

[CraigIrl]

Get someone else to do it, lol.