Old Yozza's on 182's

[MarcB]

Looking for 2 good pictures of the back of a 182 running a yozza exhaust system.
Looking to get one picture from the back straight on and then either one from above looking down or side on.

Im now going to get my backside in gear and try and sort my exhaust system that sits under my bumper.

 

[jesus]

Have a look in my project thread mate.

 

[ekaJ]

Does that help in anyway?

 

[MarcB]

Does that help in anyway?

That is perfect !!!
Its picture like this im looking to get so i can see exactly how far it should sit out.

 

[ekaJ]

That is perfect !!!
Its picture like this im looking to get so i can see exactly how far it should sit out.

Mine now sits very slightly further out from that as I modded my cat-centre join, wish it was still like above!

 

[jesus]

Remember you can adjust the rear bumper as well as the exhaust - Fred taught me that one

 

[MarcB]

The Rear Bumper ?

How would i go about doing that ?

 

[Fred@BTM]

2 x 10mm bolts under the bumper, you sometimes have to file out the holes a bit on the plastic straps

 

[JezzaMac]

Looking for 2 good pictures of the back of a 182 running a yozza exhaust system.
Looking to get one picture from the back straight on and then either one from above looking down or side on.

Im now going to get my backside in gear and try and sort my exhaust system that sits under my bumper.

When your doing yours il come down and do mine at the same time! Interesting to know its possible to adjust the bumper.....!

 

[MarcB]

I noticed yours is exactly the same as mine.

Maybe us scottish yozza owners are doing things back to front.

Im going to be changing everything buddy, From the CAT back all new rubbers, nuts, bolts & fitting kit.

 

[ekaJ]

I noticed yours is exactly the same as mine.

Maybe us scottish yozza owners are doing things back to front.

Im going to be changing everything buddy, From the CAT back all new rubbers, nuts, bolts & fitting kit.

Im fairly sure something has been made wrong with yours, as there is no way you will make it come out about an inch with all that.

Im sure I read something about it previously as there has been a few people with that version.

Maybe Fred could confirm?

 

[Fred@BTM]

possible, but i know of only 1 dodgy one that we replaced under warranty (in 8years!)

some you need to adjust the engine mounts and the bumper, others you literally throw it at the car and it fits perfectly!

i can take measurements so you can compare your backbox to make sure its ok

 

[MarcB]

Im now trying to talk my other half into a road trip down to BTM so fred can sort this.

Fred are you still a 24/7 garage ?

 

[Fred@BTM]

aye

 

[JezzaMac]

You not thought about getting someone in Edinburgh to sleeve the cat? Means you could make the sleeve as long as you need to get it sitting how you want?!

 

[wozza182]

 

[wozza182]

 

[200 Alex]

aye

You wizard, Fred. Might give that a try on mine.

Still not completely satisfied with it.

 

[montana]

Is the backbox to centre section sleeved or flange? On my milltek it's sleeved so the amount it sticks out can be easily adjusted this way ?

 

[Fred@BTM]

2 bolt flange so you can't balls it up...........

 

[Clart]

 

[Šįk]

182 by PSJHodgson, on Flickr

 

[Coops Mk1]

god I miss the look of my yozza, such a pretty exhaust!

 

[JezzaMac]

2 bolt flange so you can't balls it up...........

It could be possible to get a 10mm spacer made to put between the two flanges which would move the backbox out a bit!

 

[Clamborghini]

Where can I get a Yozza with outward rolled tip from?

 

[Fred@BTM]

It could be possible to get a 10mm spacer made to put between the two flanges which would move the backbox out a bit!

doesn't need it, as you can see from the other photos they fit perfectly, just some cars seem to be "friday afternoon" efforts

 

[SBV116]

I have fit one once that seemed short, how odd!

 

[Fred@BTM]

^need to move the engine on its mounts then they line up perfectly

 

[SBV116]

It was years ago! Prob wrote off, lol! Not because northerner (apparently) then???

 

[Fred@BTM]

i still have an image of you in my head, wurzel gummage lookalike but slightly annorexic?

 

[SBV116]

Lol, I would hope not, but others may disagree!

 

[497adam]

Ha ha

 

[JezzaMac]

doesn't need it, as you can see from the other photos they fit perfectly, just some cars seem to be "friday afternoon" efforts

Mine has been a Friday afternoon, Sunday morning, Monday AM and Wednesday night effort and still cant get it to line up lol! Might give it another bash tomorrow night after work!

 

[Jekyll]

7 by Dr-Jekyll, on Flickr

 

[MRBILLYUK]

7 by Dr-Jekyll, on Flickr

I've never seen one sticking out that far before :S . Mine must be a Friday afternoon car too as it's always sat in the cutouts .

 

[Jekyll]

Here's a few more from the same car

32 by Dr-Jekyll, on Flickr

39 by Dr-Jekyll, on Flickr

Such an awesome looking and sounding exhaust

 

[MarcB]

Hoping by tomorrow night mine will no longer be a friday afternoon kwik fit special

 

[busterkins]

Love yozzas much better than the pea shooters