OMG ! this has to be a first !

[cliobritt]

Bro bought me some Richbrook silver tyre valve caps for xmas.....
All good, until I go to put air in the tyre last week and EVERY ONE is stuck on!!! tried a spanny and mole grips, no joy. tried WD40 too, no joy.

Help?:S

 

[Bluebeard]

Hacksaw.

Anglegrinder.

 

[TomBear]

have you tried heating them up?

 

[daviebroon]

never use metal tyre caps. They ALL stick on.

End of

 

[adam1942]

never use metal tyre caps. They ALL stick on.

End of

very helpful and all but he neede help on how to take them off not what he should have done at least i know for future hehe

 

[whatisjustis]

Heat them up, expand the metal a little.

 

[Eckascliovalver]

When mines corrode on i use mole grips to hold the valve and an adjustable spanner to take the valve off.

 

[daviebroon]

very helpful and all but he neede help on how to take them off not what he should have done at least i know for future hehe

why thank you for guiding me in the correct direction.

 

[adam1942]

why thank you for guiding me in the correct direction.

damn stright!

 

[Beef-Mc]

A big wood saw, the two man kind needed to cut down oak tree's should see you reet.

 

[AK]

This happened to me before. Took it too quick fit and the guy just heated it up with a lighter then used two mole grips to twist it off. Either that or it was something like £8 a tyre to get new valves . . .

 

[jesus]

Always happens with metal dusties mate! Just get some grips on the valve and cap, then twist like fook.

 

[polishdon@hotmail.com]

i got a pair, aint put em on yet and kinda scared to now...but shouldnt a lil grease inside the caps before putting them on prevent this?

 

[geordieracer]

i got a pair, aint put em on yet and kinda scared to now...but shouldnt a lil grease inside the caps before putting them on prevent this?

I would think so. did that with my richbrook ones, and they come off no problem every time.

 

[stewart]

Theres a thing the garage used on ones my Dad's vectra had called Shock Spray (iirc) nothing else was going to take them off but this spray freezes them and they came off instantly!

 

[Smiff89]

i had the same problem and it never ever came off lol

 

[will.clio!]

iv had metal caps which come of quite easy, well only have three now because some fuker stole one (probally be on a kids bike round my way) anyways, they had like a copper coloured sleave inside. and come off fine. but i have just had ordinary (ripspeed ftl) ones which where a b!tch to get off.

 

[geordieracer]

As polish don said, get some grease on the threads. Job's a good 'un.

 

[Riley!]

g=bit of grease on threads before you put them on and there fine. otherwise your screwed

 

[Bazzon]

Go find a 8year chav on a bike, he will have no problem getting them off in record time!

 

[cliobritt]

will give a lighter a go tomoz!

 

[rich1982]

will give a lighter a go tomoz!

it prob won't work my dad just had all 4 valves replaced today because of this £20 later they off

u need the ones with the copper sleeve inside no need to grease these ones though they don't bind on copper - copper :approve:

 

[jesus]

I used some f**k off grips and twisted them like mad.

 

[scott1205]

When mines corrode on i use mole grips to hold the valve and an adjustable spanner to take the valve off.

thats wot i done straight off

 

[Pigeon]

I got some shitty free ones in FastCar mag a few years ago, they are still solidified onto the alloys in my garage at the minute lol, youll need replacement valves m8!

 

[st3ve]

Mine have steel ones on too god only knows why someone would put these on, theres nothing wrong with standard caps so I'll try the aforementioned methods tomorrow.

 

[Mark One]

Hacksaw.

Anglegrinder.

Men tools.
Word.