PH1 Spacers with standard alloys

[Holty]

What size spacers are people running on PH1 with the standard alloys and track use?

​Currently my car has stud and nut conversion to take spacers.

 

[MG cup]

Burp speed run 25mm front and 15mm rear iirc, best to get a tape out. You will get scrubbing though unless you are at a decent height.

 

[Space Cadet]

I'm 30mm front and 20mm rear, both with studs and a fair amount of camber, -3.5 front and -2 rear I think.

 

[Holty]

Cheers, car is only on koni and eibach so not massive drop.

 

[Mar172]

Cheers, car is only on koni and eibach so not massive drop.

20 on the front 5 on the back

 

[The Russian.]

25's on front 5's on back, lowered a fair bit too

 

[Harpham]

Mine runs 25mm on the front and 10mm hub spacers with -1 degree camber on rear.
It isn't a track car though.