Piper 182 exhaust pixs

[mi16chris]

Any one having one ? Would like to hear u feed back as I'm thinking of buying one and some pixs of one fitted would be great also were is the best place to get it thanks

 

[not normal dan]

I like the piper exhausts, never fitted a clio one but fitted piper manifolds an full systems to loads of saxo's an 106's an they always fit really well.

Really good quality product from past experience an all the ones I have fitted have given a nice purposful raspy tone, not to boomy!

 

[Dan519]

I sell them

http://www.cliosport.net/forum/show...per-System-with-3-5-quot-Slash-Cut-Tail-Pipes

 

[not normal dan]

I sell them

http://www.cliosport.net/forum/show...per-System-with-3-5-quot-Slash-Cut-Tail-Pipes

What do you retail them for danny? Can you get a decat for them too?

 

[Cup M@]

I had one on my nitrous 306 sounded great wont be disappointed

 

[Dan519]

£469.99 for the 182 system (5% less than rrp)

I can get janspeed decats.

Or I can make sleeve jointed decats when I do the fitting like this one...

 

[not normal dan]

£469.99 for the 182 system (5% less than rrp)

I can get janspeed decats.

Or I can make sleeve jointed decats when I do the fitting like this one...

Sweet, tbh I could only find a place on ebay that had them but now I know you stock them I'll hopefully have one come spring time (talk the missus into an early birthday present haha).

I've already got a janspeed decat that I haven't fitted so thats all good.

 

[Dan519]

They're made to order (different tailpipes available), but very quick turnaround. Just let me know

 

[not normal dan]

Yeah just seen your link dan to that other thread with the slash cuts, I'll be in touch as soon as I've moved out an that's all done an dusted.

 

[mi16chris]

I sell them

http://www.cliosport.net/forum/show...per-System-with-3-5-quot-Slash-Cut-Tail-Pipes

very tidy mate thats the first thing on my list

 

[jonw279]

Iv got one fitted had it on for 3 year now, And it's decatted. I think it sounds great!

 

[mrc300]

Danny out of interest, what other exhausts do you sell?

 

[Dan519]

Any Ktec/janspeed, oreca etc. Think I can still get supersprint. Remus.... Whatever you want really

 

[mi16chris]

Just ordered one hope the post man dose not take too long

 

[182tev]

Do Oreca make one for the 182 ?

 

[mi16chris]

Do Oreca make one for the 182 ?

I don't think so mate

 

[MikeClio172SPT]

This is a good post, on my 172, i was going to fit 182 manifold, milltek 182 cat, but ive already got my 172 stealth system, i havent even looked if the two will mate together.

 

[Dan519]

This is a good post, on my 172, i was going to fit 182 manifold, milltek 182 cat, but ive already got my 172 stealth system, i havent even looked if the two will mate together.

you will need to buy or fabricate a cat/decat pipe. I made a cat pipe for my 172 using original downpipe flanges and a new cat

 

[MikeClio172SPT]

you will need to buy or fabricate a cat/decat pipe. I made a cat pipe for my 172 using original downpipe flanges and a new cat

This is what i thought id need to do.... havent really took the time to look yet, but my stealth exhaust is 2.5 inch bore, & so is the cat id like!!!! Id need to weld a flange to the 182 milltek cat from what ive looked at briefly.

 

[StevenMc29]

How are Millteks rated? I'm after a 182 ATM but I wouldn't want anything too loud as it will be my daily. Yaris is too loud ATM.

 

[Dan519]

How are Millteks rated?

it will crack. That's about all I have to say on those

 

[MikeClio172SPT]

it will crack. That's about all I have to say on those

lolololol. Really Dan? what failure's you seen on em? many?

 

[StevenMc29]

Whats a nice cat back system that wouldn't be too noisy at 60/70 with a panel filter?

 

[Dan519]

lolololol. Really Dan? what failure's you seen on em? many?

ALL of them. I have one customer that has a spare rear section that I've welded up so I can swap it back next time it goes on the new one.

 

[Dan519]

Whats a nice cat back system that wouldn't be too noisy at 60/70 with a panel filter?

I would sell you a Janspeed sport if you want a sensible system.

 

[StevenMc29]

Price and postage to NI? Cheers. PM if you prefer.

 

[MikeClio172SPT]

ALL of them. I have one customer that has a spare rear section that I've welded up so I can swap it back next time it goes on the new one.

but you've seen no trouble with milltek cats cracking?

 

[boarderpat]

So are the piper systems available with the slash cut and inward role?

 

[mi16chris]

Check out my review mate pics and vids there inward rolled

 

[Stefan.]

what are these like noise wise compared to a 'old style' yozza (cat back for both)

 

[mi16chris]

what are these like noise wise compared to a 'old style' yozza (cat back for both)

Look at my review mate il link u , there loud as hell tho I've got a decat

 

[Stefan.]

Look at my review mate il link u , there loud as hell tho I've got a decat

which is why i asked what they are like with the cat in

 

[Dan519]

So are the piper systems available with the slash cut and inward role?

I've had them made with a slash cut. I can get them made, special order

http://www.cliosport.net/forum/show...lash-Cut-Tail-Pipes&highlight=piper+slash+cut

 

[Stefan.]

dan can i ask with the price you sell them at does that include fitting?

 

[Dan519]

£469 plus fitting

 

[Stefan.]

£469 plus fitting

£400 delivered from kam racing? why are you more..

 

[Dan519]

They have it listed wrong, simple as that. Mentioned it to Piper a while back, they went spastic. They also don't do specials or fitting

 

[boarderpat]

Check out my review mate pics and vids there inward rolled

I saw that, I see that it's inward rolled but it doesn't look slash cut. Sounds great!

I've had them made with a slash cut. I can get them made, special order

http://www.cliosport.net/forum/show...lash-Cut-Tail-Pipes&highlight=piper+slash+cut

I saw that as well and love the look, I just want to know for sure if they can be slash cut AND inward rolled. How much does the custom tips add to the price?

 

[Stefan.]

piper ordered

 

[roberto.]

Dan, do you do the piper with a straight through center section?