182 FF Arctic
i'm looking at doing my rear discs & pads but never done rear's before how easy it?
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
rear brakes 182
- Thread starter Arctic_182
- Start date
d19wood
ClioSport Club Member
Clio 172 T , Megane
Getting the disc off is easier than you think, did mine recently as I was fed up pay for someone else to do it badly. Just chap the dust cap off the centre of the disc to get to the 30mm nut holding it to the stub. You will need a long bar as it's on very tight and maybe need a little heat with a gas torch but I only needed to give it very little and it came off no bother. Putting the new one back on is easy just make sure before you put the nut on that the circlip over the bearing is in the groove properly and tighten to about 170Nm.
182 FF Arctic
does the abs ring come off easy enough?
182 FF Arctic
ok cheers
Clio172 / Focus Ti X
think he means the cover over the hub nut Fred.
And like Fred says, Tighten exactly to what is needed and mind the spacer lol. Iv seen a few people forget that.
And like Fred says, Tighten exactly to what is needed and mind the spacer lol. Iv seen a few people forget that.
Black Gold Trophy
Of all the clio sports I've worked on I've never seen one with covers over the rear stub axle nuts.
Not only is fitting the spacer important but getting it the right way round is mega important!
One side is slightly tapered and faces inwards (towards the car)
Not only is fitting the spacer important but getting it the right way round is mega important!
One side is slightly tapered and faces inwards (towards the car)
d19wood
ClioSport Club Member
Clio 172 T , Megane
View attachment Brakes - all clio models.pdf
Fred's got the torque of the top of his head as usual, this is what I used for doin them
Fred's got the torque of the top of his head as usual, this is what I used for doin them
bozothenutter
ClioSport Club Member
sorry to revive an old thread, but i'm thinking about doing the brakes aswell.
What is the minimum thickness of the rear disc on a 182?
is there a guide?
What is the minimum thickness of the rear disc on a 182?
is there a guide?
bozothenutter
ClioSport Club Member
never mind, found the guide......:S
George@RTR_Parts
ClioSport Trader
8mm when new and 7mm min thickness on the rear discs mate
eh? 17.5da NM is 175NM??
