ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Rear Bumper Removal
- Thread starter Sparky
- Start date
182cup & 172 racecar
Under rear wheelarches 10mm bolts,then the screws (torx bolts) bolts along the back after you open the boot.
MK2 Clio
Okay Cheers, is it hard to pull off after?
No not at all.
As said.
Two bolts right up top underneath arch liners on each corner of the bumper (Will need to undo arch liners)
Two bolts underneath bumber in line with either side of number plate.
Two torx screws in top when you open boot.
As said.
Two bolts right up top underneath arch liners on each corner of the bumper (Will need to undo arch liners)
Two bolts underneath bumber in line with either side of number plate.
Two torx screws in top when you open boot.
Pretty sur theres 4 torx screws when you open the boot
182cup & 172 racecar
Does it really matter,just take out the ones you can see.
4 on the standard Clio iirc.
2x 20* Torex screws holding the wing liners on under the bumper.
