Rear Spacers - Camber or no camber?

[Harpham]

Fitted my coilovers on the sunflower this week.
I was running with 10mm spacers on the rear, which looked epic, but unfortunately scrub, so i've had to remove them.

7/5/13 - Coilovers by Harpham PT, on Flickr

7/5/13 - Coilovers by Harpham PT, on Flickr

Should I just go with a smaller 5mm spacer, or go with the MAD 10mm spacers with the added camber?

If I go with the ones with the camber, how much camber should I go for to ensure that I don't get any scrubbing issues? Would 1 degree be enough?
Has anybody got any pics of these spacers fitted with 1 degree and 1.5 degrees of camber?

 

[MG cup]

If your good at maths then you could work out the degrees you need to move the wheel in for your setup.

Chip the human abacus could help.

 

[JezzaMac]

I have 10mm and -1 degree spacers. It turns out they are closer to -1.5 degrees as I now have -3 degrees each side which is more than I wanted!

 

[JamesBryan]

Bit much that Jezza, almost looks broken

 

[Harpham]

How low are you Jezza?

Part of me is thinking to just whack on 5mm spacers to make things easier for me lol.

 

[Cup_Phil]

I've just fitted 15mm rear spacers with -1 degree and there's no scrubbing
But I have ET43 wheels so 5mm closer in than yours

I wouldn't do more than -1 degree as they have -1.3 as standard so thats -2.3 at the rear

I have some of the -1degree K-Tec plastic camber shims that I never used - I could post them to you for some beer money and you could try putting them on one side to see if they clear?

Cheaper than spending £40/50 on spacers that don't fit

 

[JezzaMac]

How low are you Jezza?

Part of me is thinking to just whack on 5mm spacers to make things easier for me lol.

Im pretty low. That picture over exaggerates how much camber there actually is to be honest. Its hard to get a decent picture of what the camber looks like, I dont think it looks too much in real life!

Here is another picture just because I <3 picture whoring

 

[Christopher]

A touch of neg and the 10mm jobbies. Don't be a homo.

 

[wayne9989]

Edge of the rear tyre is off the ground in this pic Love it!