Removing rear wiper motor

[WILLYx]

Taken wiper arm off and just left with the thread. How do I get the motor out? Feels like the plastic surround will break if I pull anymore ( obviously undone the nuts already)

 

[Fletcher]

Make wouldn't come off either, so I cut it off.

 

[-Danman-]

Which plastic surround do you mean mate?

 

[WILLYx]

The outside surround. Just on the glass

 

[-Danman-]

It should just pull straight off mate. It's only held on by a push-fit clip either side

Then there's another nut underneath that.

 

[LiamR172]

Pull the plastic off with even pressure on both sides. Obviously if you yank 1 side it will snap.

If you cant get the plastic off then youll love the wiper itself i chopped my whole thing off

 

[WILLYx]

So I've got the 2 nuts off the motor itself. And I have the arm off. But it won't come apart...

 

[Fletcher]

So I've got the 2 nuts off the motor itself. And I have the arm off. But it won't come apart...

I had the same problem I just got a disc cutter and hacked it off. ( don't do this if you plan on refitting)

 

[-Danman-]

So I've got the 2 nuts off the motor itself. And I have the arm off. But it won't come apart...

It's all 1 piece mate. You just pull the motor and the long bit comes through the hole with it?

 

[WILLYx]

Done it now, how embarrassingly simple! :S

 

[belly118]

Done it now, how embarrassingly simple! :S

Did you just pull the motor?
Tried to do mine earlier, felt like something else was holding it in...

 

[belly118]

Dm, found out theres another nut...