ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Skoda Octavia vRS Llumar Window Tint Install, Safe Wash and Wax Test



  Megane R26
We thought we'd share one of the many window tint installs we have completed recently with you to show to process step by step. This car is owned by a fellow DW Member who drove well over 100 miles to come and see us! I'd also like to apologise in advance for the messy state of the unit which is being addresses in the coming weeks.


We don't have any before pics unfortunately but the car was naturally quite dirty after the 100 mile+ drive to us. Given that the window tint install process can involve some 'overspray' from the slip solution which is unsightly if left on the paintwork - we provided a 'safe wash' on the Octavia as part of the process, before beginning the install and then wipe the Slip Solution excess away with a Quick Detailer like Zaino Z6.


Some pics after the wash and drying phase, before we began the film install:


8275106623_82f57a40b9_z.jpg

DSC04256 by RussZS, on Flickr


8276172248_ce647d52ae_z.jpg

DSC04259 by RussZS, on Flickr


We exclusively use Llumar Window Tint film which we believe to be the best on the market. Nigel the owner opted for 5% on the rear windows and 20% on the doors.


The first step was to measure the rear window from top to bottom and side to side allowing excess film.


Next we do a 'rough cut' around the window shape and then begin shrinking the film using a heat gun to shrink the film to the contours of the glass:


8276172664_446672c06b_z.jpg

DSC04262 by RussZS, on Flickr


Next the film is subjected to a wet test:


8276173054_afae8347ee_z.jpg

DSC04263 by RussZS, on Flickr


The excess 'fingers' still present are then shrunk using the heat gun:


8275109493_bafe5d9d83_z.jpg

DSC04266 by RussZS, on Flickr


Next is the 'final cut' which is a neater final cut in line with the matrix on the rear window:


8276174218_4922ec7e29_z.jpg

DSC04268 by RussZS, on Flickr


Window is cleaned and prepared for film install using wire wool and slip solution (a mixture of Baby Bath and Water):


8276174590_44c843ef3a_z.jpg

DSC04269 by RussZS, on Flickr


Plastic sheeting is used to ensure no excess slip solution drips on any of the interior or trim:


8276175154_0fce1528c7_z.jpg

DSC04270 by RussZS, on Flickr


8276176872_41b36e2d16_z.jpg

DSC04274 by RussZS, on Flickr


The cleaning process is completed twice on the rear window to ensure its as clean as possible to ensure proper adhesion from the film.


After the cleaning stage we are ready to install the film. 'Flushing' is used to aid the installation:


8276178386_4041fc010e_z.jpg

DSC04278 by RussZS, on Flickr


The film is also covered in slip solution when the backing film is removed:


8276178706_8b7dda3b29_z.jpg

DSC04279 by RussZS, on Flickr


Next the film is placed onto the interior and any excess air and water is pushed out.


This process was repeated on the rear quarter windows.


For the rear doors, the door cards were fully removed so that the film could be installed correctly. Again the glass is cleansed twice thoroughly:


8276180210_73d8f14160_z.jpg

DSC04304 by RussZS, on Flickr


8276181434_e8d7883fa1_z.jpg

DSC04307 by RussZS, on Flickr


8275117745_107ea893bd_z.jpg

DSC04309 by RussZS, on Flickr


8275118129_da2412d89e_z.jpg

DSC04310 by RussZS, on Flickr


Finally the door card is reinstalled.


After the installation is completed, any excess slip solution present on the paintwork and exterior glass was removed with 3M Glass Cleaner and Zaino Z6 to ensure the car is looking its best.


8276183276_003d7c7454_z.jpg

DSC04314 by RussZS, on Flickr


Whilst Milly was working her magic, the owner Nigel and I, were having a play with a few boutique waxes on the front end of his car.


We applied Bouncers Blue Lagoon and Swissvax Shield, Best of Show and Crystal Rock to the front end of the Skoda as a bit of fun to see how they compared and lasted as Nigel covers quite a few miles... I'll let him update you all on the progress :)


Here are the afters...


8275120095_19d6c34b70_z.jpg

DSC04319 by RussZS, on Flickr


8275120479_8460bd2f51_z.jpg

DSC04320 by RussZS, on Flickr


8276185334_4247dc9773_z.jpg

DSC04325 by RussZS, on Flickr


8276185726_9858b3b39f_z.jpg

DSC04326 by RussZS, on Flickr


8275121613_3f75ec48b7_z.jpg

DSC04327 by RussZS, on Flickr


8275122037_f4dc9f224a_z.jpg

DSC04328 by RussZS, on Flickr


8275122521_9990889c75_z.jpg

DSC04329 by RussZS, on Flickr


I'd personally like to thank Nigel for making the trip across to see us and also for bringing some Krispy Cremes with him - what a legend!! :lol: It was a stunning car too - a real pleasure to work on!


We have also completed tint installs for a few other Detailing World members:


20% on this Astra SRI for Andrew from Leicester!


8373366769_59a98ab85e_z.jpg

DSC05086 by RussZS, on Flickr


5% and a Sun Strip on this lovely Seat Leon Cupra for Jon from Dudley!


8355796624_7d2ba7825a_z.jpg

DSC04813 by RussZS, on Flickr


If you'd like a quote for any window tinting then feel free to send me a PM on here or send Milly a message via her Midlands Auto Tints Facebook Page:


https://www.facebook.com/MidlandsAutoTints


Thanks for reading!


Russ (and Milly!) :)
 


Top