ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Somebody grab this bargain!!
- Thread starter Andy A
- Start date
You can have my write up for free, here goes
1 roll of duct tape
Take 2 pieces of stench pipe (150mm long each)
1 90 deg pipe bend
1 childs bouncy castle electric pump/ remove reducer flanges
Connect pump in-between both 150mm pipes NOTING DIRECTION of airflow towards inlet manifold
Tape elbow onto inlet minfold, jam pipe into elbow,then ram induction cone onto pipe before CASTLE PUMP T4.9 HYBRID and seal with duct tape
Run the T4.9 DC power supply to the battery connections with 0.75mm tri rated cable
Thats it folks hope this info was worth the R&D i put into it :approve: :rasp:
1 roll of duct tape
Take 2 pieces of stench pipe (150mm long each)
1 90 deg pipe bend
1 childs bouncy castle electric pump/ remove reducer flanges
Connect pump in-between both 150mm pipes NOTING DIRECTION of airflow towards inlet manifold
Tape elbow onto inlet minfold, jam pipe into elbow,then ram induction cone onto pipe before CASTLE PUMP T4.9 HYBRID and seal with duct tape
Run the T4.9 DC power supply to the battery connections with 0.75mm tri rated cable
Thats it folks hope this info was worth the R&D i put into it :approve: :rasp:
Similar threads
